Skip to contentSkip to conversation

Can't use fwmark filters

LARTC Alex 2 participants 2 messages Oct 26, 2003 – Oct 31, 2003

lore
Share & tools
lore

Alex

author
#0 lore raw

Hello,

I'm facing an issue that i have reported on Debian's BTS as a bug against iproute package. Prior to this i have been looking around trying to find out what could be wrong but had no success to get it to work.

Below is a what i've reported on Debian's BTS as
http://bugs.debian.org/215629

Here goes the story, thanks for any tip on the subject.

Alex

----

I would like to add a fwmark filter to the original HTB based LARTC "WonderShaper" script (http://lartc.org/wondershaper/).

I am using a self compiled kernel from latest sarge kernel-source-2.4.22 and based on kernel-image-2.4.22-k7 provided config file.

The idea is to add a single additionnal fwmark filter :

tc filter add dev ppp0 parent 1: protocol ip prio 10 \
handle 1 fw classid 1:30

When adding this line i get the following error message :

RTNETLINK answers: Invalid argument

If i modify the WonderShaper script, remove all "tc filter" lines but the fwmark filter one i get no such error.
The filter seems to get declared just fine.

From here i can start uncommenting some of the "tc filter" lines provided in WonderShaper without getting any error.
At some point when having enabled again 4 or 5 "tc filter" original lines the reported error strikes again.

I have tried simplifying the script to something like this :

tc qdisc add dev ppp0 root handle 1: htb default 60

tc class add dev ppp0 parent 1: classid 1:1 htb rate 450kbit tc class add dev ppp0 parent 1:1 classid 1:10 htb rate 450kbit tc class add dev ppp0 parent 1:1 classid 1:60 htb rate 450kbit

tc qdisc add dev ppp0 parent 1:10 handle 10: sfq
tc qdisc add dev ppp0 parent 1:60 handle 60: sfq

tc filter add dev ppp0 parent 1: protocol ip prio 1 handle 1 fw classid 1:10 tc filter add dev ppp0 parent 1: protocol ip prio 1 handle 6 fw classid 1:60

Which works fine.

Adding this single line triggers the error again :

tc filter add dev ppp0 parent 1: protocol ip prio 1 u32 \
match ip tos 0x10 0xff flowid 1:10

---> RTNETLINK answers: Invalid argument

I am stucked here... i haven't been able to find anything related to this on the net and i hope not to be misusing 'tc'.

Thank you.

-- System Information:
Debian Release: testing/unstable
Architecture: i386
Kernel: Linux routeur 2.4.22-routeur3 #1 Sat Oct 11 11:40:45 CEST 2003 i686
Locale: LANG=C, LC_CTYPE=C

Versions of packages iproute depends on:
ii libc6 2.3.2-7 GNU C Library: Shared
libraries an

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello,

Quoted 11 lines · Alex

tc filter add dev ppp0 parent 1: protocol ip prio 1 handle 1 fw classid 1:10 tc filter add dev ppp0 parent 1: protocol ip prio 1 handle 6 fw classid 1:60

Which works fine.

Adding this single line triggers the error again :

tc filter add dev ppp0 parent 1: protocol ip prio 1 u32 \
match ip tos 0x10 0xff flowid 1:10

---> RTNETLINK answers: Invalid argument

Looks like the same problem what i reported ~2 months ago. A quick solution would be to use different prio's for fw filters and u32 filters.

- --
Marton Sandor - [email protected]
GPG id: 0x32825B5A , www.keyserver.net
BOFH excuse #438:

sticky bit has come loose
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (GNU/Linux)

iD8DBQE/osMrKiUXNzKCW1oRAs/QAJ9CZzpifK6WEdBriFGsCUDN7gYHGACdGkdS VYdgeBMVFlq1pCLYfsFQvzo=4lXy
-----END PGP SIGNATURE-----

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/