dead onlink
Hello people:
I'm new in the forum. I've implemented the script for load balancing of
"Linux Advanced Routing & Traffic Control HowTo" and I've a question:
When I run the next command : "ip route" I get the folowing information:
--------------
192.168.0.32/27 dev eth0 proto kernel scope link src 192.168.0.33 192.168.0.96/27 dev eth2 proto kernel scope link src 192.168.0.97 192.168.0.64/27 dev eth1 proto kernel scope link src 192.168.0.65 192.168.0.128/27 dev eth3 proto kernel scope link src 192.168.0.129 127.0.0.0/8 dev lo scope link
default
nexthop via 192.168.0.126 dev eth2 weight 1 dead onlink nexthop via 192.168.0.61 dev eth0 weight 1
-----------------------------
Is normal the part of "dead onlink" ?
Is it balancing the load between both internet providers?
Sorry for my English. I'm from Argentine.
Thanks in advance.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/