Installation problems
VERY URGENT!!! Hey, i'm final year student in upm. I have install linux Redhat 9.0. Wish to build up Qos linux packet filter using kernel-2.4.20.8 i have follow the instruction which i download from internet. But i 'm not very understand about the
instruction. The following step have been done by me:-
1) Patch the L7-kernel patch to the kernel (success)
2) Re-compile the kernel (success)
3) Enable layer-7 filtering (success)
4) After i unpack "tar xvzf iproute2_w_layer7_patch-0.9.3.tar.gz" Inside there, i found a TC folder- 31 items
- tc patch - how does the TC link against the new kernel header??? (question)
- I have make the symbolic link from /usr/src/linux to/usr/src/linux-2.4.20.8
- Where should i put the files inside the TC folder??? (question)
- When i "make" to compile, it show me error and tell me to compile the
kernel first??? (question)
- Since the tc folder have many files, which should i copy to /sbin/tc??? (question)
5) Protocol definitions
- after unpack the latest pattern from l7-filter.sourceforge.net
- i tried to cat all the pattern to /proc/net/layer7_protocols, but found error "no such files and directory" - Anythings i did wrong?? (question)
Please reply me as soon as possible. Very urgent!!! Thank you.
_________________________________________________________________
Download the latest MSN Messenger http://messenger.msn.com.my
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hello,
Thank you for your information.
I told me that you are using HTB shaping,rite?
As i know you need the tc patch for your compiled kernel isnt?? How does the TC link against the new kernel header???
Before that, i have search for info about Layer-7 QoS but not much info i got.
Since this is the latest QoS project, but i have read the latest example scripct.
It using HTB, SFQ, and etc.
Isn't any differs between the script for both project?? Slackware 8.1 LINUX + your compiled 2.4.20 kernel with all the QoS features ON
isn't enough for provide QoS HTB shaping?
Actually, i m very new user for Linux. I don't know what type of Linux should i choose.
Any suggestion?
Sorry, if i have ask a very stupid question. I really appreciate your information.
Thank you.
Quoted 56 lines
From: Rokas <[email protected]>
Reply-To: Rokas <[email protected]>
To: "wong cheongseng" <[email protected]>
Subject: Re[2]: [LARTC] Installation problems
Date: Thu, 30 Oct 2003 20:14:32 +0200Hello,
I am sorry, but I haven't tried the Layer7 QoS, so I can't give you any ideas about that... Instead I use HTB shaping: I use Slackware 8.1 LINUX + my own compiled 2.4.20 kernel with all the QoS features ON. I use HTB rules to shape traffic for both download and upload. My LINUX server is a NAT router: interface ppp0 - to internet, and eth0 interface to LAN. I put QoS HTB queues for both interfaces (on eth0 for download and on ppp0 for upload). I mark packets with IPTABLES MARK target in mangle table POSTROUTING and then add fwmark filters to appropriate HTB class. I do shaping based on ports: I reduce download and upload speed for all traffic, but some ports (HTTP, HTTPS, SSH, POP3, DNS and other) I add to interactive HTB class with higher speed. That how the shaping works. You can find much information about HTB QoS in:
http://luxik.cdi.cz/~devik/qos/htb/
http://www.docum.org
http://www.lartc.orgGood luck ! :)
Rokas Zakarevicius
Kaunas, Lithuania, Europe
Quoted 2 lines
VERY URGENT!!! Hey, i'm final year student in upm. I have install linux Redhat 9.0. Wish to build up Qos linux packet filter using
kernel-2.4.20.8
Quoted 1 line
i have follow the instruction which i download from internet. But i 'm
not
Quoted 7 lines
very understand about the
instruction. The following step have been done by me:-1) Patch the L7-kernel patch to the kernel (success)
2) Re-compile the kernel (success)
3) Enable layer-7 filtering (success)Quoted 9 lines
4) After i unpack "tar xvzf iproute2_w_layer7_patch-0.9.3.tar.gz" Inside there, i found a TC folder- 31 items
- tc patch - how does the TC link against the new kernel header??? (question)
- I have make the symbolic link from/usr/src/linuxto/usr/src/linux-2.4.20.8
- Where should i put the files inside the TC folder??? (question)
- When i "make" to compile, it show me error and tell me to compilethe
Quoted 2 lines
kernel first??? (question)
- Since the tc folder have many files, which should i copy to
Quoted 14 lines
/sbin/tc???Quoted 6 lines
(question)
5) Protocol definitions
- after unpack the latest pattern from l7-filter.sourceforge.net
- i tried to cat all the pattern to/proc/net/layer7_protocols, but found error "no such files and directory" - Anythings i didwrong??
Quoted 4 lines
(question)
Please reply me as soon as possible. Very urgent!!! Thank you.
_________________________________________________________________
Download ringtones, logos and picture messages from MSN Malaysia
http://www.msn.com.my/mobile/ringtones/default.asp
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/