Skip to contentSkip to conversation

Problems with tcng and gentoo

LARTC raptor 1 participant 1 message Nov 4, 2003

lore
Share & tools
lore

raptor

author
#0 lore raw

Here is an .ebuild I'm just making for gentoo...
Not fully tested yet, but compilation goes fine and install on my test computer.(look below). As I finish it I will give it to werner to include the .ebuild into the tcng itself... (tcsim is not compiled )

copy it to net-misc, make digest and emerge..

hth

Quoted 7 lines · On Thu, 30 Oct 2003 10:46:47 +0100 "Wouter Coppens"…

Hey,

I installed tcng on gentoo, but I always got the error:
Could not run/locate "tcc"

tcc is installed in /sbin.

Quoted 9 lines

I read somewhere that you need a little patch to get tcng running on gentoo, but I can't find the patch.

Can somebody help me?

Thanks in advance,

Wouter

===============.ebuild========# Copyright 1999-2002 Gentoo Technologies, Inc. # Distributed under the terms of the GNU General Public License v2 # $Header: $

#made by raptor
DESCRIPTION="Traffic control Next Generation.Higher level than tc" HOMEPAGE="http://tcng.sourceforge.net" SRC_URI="http://tcng.sourceforge.net/dist/${P}.tar.gz" LICENSE=""
SLOT="0"
KEYWORDS="x86"

# - additional packages needed after "make immaculate":
# transfig (fig2dev), wget

DEPEND=">=virtual/linux-sources-2.4.19

Quoted 7 lines

=perl-5.6.1
=iproute-20010824-r2
=gnuplot-3.7.1-r3
=binutils-2.13.90.0.4
=gcc-3.2-r4
=make-3.80
=flex-2.5.4a

Quoted 8 lines

=yacc-1.9.1-r1
=grep-2.5-r1
=sed-4.0.1
=gawk-3.1.1-r1
=textutils-2.1
=fileutils-4.1.11
=sh-utils-2.0.15
=tetex-1.0.7-r12

"
#>=LaTeX
#>=dvips

S=${WORKDIR}/tcng

src_compile() {
#first put iproute sources in tcism #if tcism is to be compiled. we dont do that

#create /var/tmp/portage/tcng-xxx/image/usr&bin in advance #so that configure doesnt complain that it doesnt exists dodir /usr/bin
#I'm using 2.4.22 so i had to handle it somehow :") perl -pi -e 's/,2.4.21/2.4.21,2.4.22/' configure

# perl -pi -e 's|#!/bin/sh|#!/bin/sh\nTCNG_INSTALL_CWD=/usr|' ./scripts/localize.sh

        ./configure --no-tcsim \
                --install-directory ${D}usr
        emake || die
#       echo
#       einfo "Now will run tcng test suite.....\n\n"
#       sleep 3
#       make test

}

src_install() {
dodir /usr/bin

#For localization.sh to work corectly
#TCNG INSTALL/TOPDIR has to be /usr, instead of /var/tmp/portage/tcng-xx/image/usr... TCNG_INSTALL_CWD=/usr einstall
}

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/