Skip to contentSkip to conversation

wrong shaping

LARTC victor 2 participants 2 messages Nov 8, 2003 – Nov 10, 2003

lore
Share & tools
lore

victor

author
#0 lore raw

I have a class parent and a class child;
In the child class I have 6 dropped pachets, but in the parent class I have none(in teh example configuration parent is 1:9 and child is 1:2eb). Is this possible, or I have somethimg wrong in the configuration? My exact problem is:
-I have many clases that have 1Kbit rate and 500Kbit ceil.
-I have HZ00, compiled in the kernel.

When I create a class with ratedKbit, ceildKbit, this class will not transfer at this exact rate. The rate will repat jumping from a few Kbits to 64Kbits and back, but will never stay at the ratedKbit.

More than that, many clases that have rate=1Kbit, ceilP0Kbit will have a better transfer than the class with rate 64Kbit.

My configuration is:
tc qdisc add dev eth1 root handle 1: htb default 2

tc class add dev eth1 parent 1: classid 1:9 htb rate 1400Kbit prio 0 quantum 2000

tc class add dev eth1 parent 1: classid 1:2 htb rate 9999Kbit prio 0 quantum 2000

Just one class and 1 filter(thay are many):

tc class add dev eth1 parent 1:9 classid 1:2eb htb rate 64Kbit ceil 500Kbit prio 0 quantum 2000

tc filter add dev eth1 parent 1: prio 1 handle 7: protocol ip u32 divisor 256 tc filter add dev eth1 parent 1: prio 1 protocol ip u32 ht 800:: match ip dst xxx.xxx.xxx.0/24 hashkey mask 0x000000ff at 16 link 7:
tc filter add dev eth1 prio 1 protocol ip u32 ht 2:eb match ip src xxx.xxx.xxx.xxx flowid 1:2eb

Configuration for upload is simetrical.

Thank you

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 11 lines · victor

I have a class parent and a class child;
In the child class I have 6 dropped pachets, but in the parent class I have none(in teh example configuration parent is 1:9 and child is 1:2eb). Is this possible, or I have somethimg wrong in the configuration? My exact problem is:

(quoted diff) +0 -2
-I have many clases that have 1Kbit rate and 500Kbit ceil.
-I have HZ00, compiled in the kernel.

When I create a class with ratedKbit, ceildKbit, this class will not transfer at this exact rate. The rate will repat jumping from a few Kbits to 64Kbits and back, but will never stay at the ratedKbit.

How do you measure this ?

Quoted 17 lines

More than that, many clases that have rate=1Kbit, ceilP0Kbit will have a better transfer than the class with rate 64Kbit.

My configuration is:
tc qdisc add dev eth1 root handle 1: htb default 2

tc class add dev eth1 parent 1: classid 1:9 htb rate 1400Kbit prio 0 quantum 2000

tc class add dev eth1 parent 1: classid 1:2 htb rate 9999Kbit prio 0 quantum 2000

Just one class and 1 filter(thay are many):

tc class add dev eth1 parent 1:9 classid 1:2eb htb rate 64Kbit ceil 500Kbit prio 0 quantum 2000

Quoted 7 lines

tc filter add dev eth1 parent 1: prio 1 handle 7: protocol ip u32 divisor 256 tc filter add dev eth1 parent 1: prio 1 protocol ip u32 ht 800:: match ip dst xxx.xxx.xxx.0/24 hashkey mask 0x000000ff at 16 link 7:
tc filter add dev eth1 prio 1 protocol ip u32 ht 2:eb match ip src xxx.xxx.xxx.xxx flowid 1:2eb

Configuration for upload is simetrical.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/