Skip to contentSkip to conversation

Load balancing and failover

LARTC hare ram 1 participant 1 message Nov 19, 2003

lore
Share & tools
lore

hare ram

author
#0 lore raw

Hi all

i was going through the documents
i need to achive the following setup, but iam confused to deploy but some one recomed me what will be good

        ------------------------
offic ------------------------  other office ----- Switch ----lan users
        ___________________

--- fiber link
___ wireless link

now i want fiber both the links to be load balance from other office to this office
when one fiber down, it shoould shift to other fiber with full load if other fiber down, it should shift to wireless

other side i have PC with 4 ethernet cards

1 connected to 1st fiber
2nd connected to 2nd fiber
3 is connected to wireless
4th is connect to local LAN of other side of office

OFFICE side all connected to to my 3548XL Cisco Switch

i dont want to give any IP's to 1 2 3, they should work in bridge mode 4th will have one of the IP range of OFFICE .

iam using RH 9.0 with all patches

any one recomend me how can i achive this setup

thanks in advance for the advice

hare

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/