use 3rd octet as hashkey
Hi,
I want to use 3rd octet in the ip address for creating hashng filters ?
How do I do it?
Venkatesh K
Quoted 5 lines · On Mon, 24 Nov 2003 09:52:30 +0530 "Venkatesh. K" <[email protected]>…
Hi,
I want to use 3rd octet in the ip address for creating hashng filters?
How do I do it?
Hi,
what about this (two level hashing with the 3rd and the 4th octet):
FILTER_ADD="/sbin/tc filter add dev imq0 parent 1:0 protocol ip"
# 1st level - 3rd octet (mask 0x0000ff00)
$FILTER_ADD handle 2: u32 divisor 256
$FILTER_ADD u32 ht 800:: match ip dst 0/0 \ hashkey mask 0x0000ff00 at 16 link 2:
# 2nd level - 4th octet (mask 0x000000ff)
for i in $(seq 0 255); do
n=$(printf "%x" $i) $FILTER_ADD handle $n: u32 divisor 256 $FILTER_ADD u32 ht 2:$n match ip dst 0/0 \ hashkey mask 0x000000ff at 16 link $n:
done
# hexa 10.11.12.13 -> c:d
hexa()
{
local IFS='.'
set $1
printf "%x:%x" $3 $4
}# example: put 10.11.12.13 into the class 1:42 ip.11.12.13
$FILTER_ADD u32 ht $(hexa $ip) match ip dst $ip flowid 1:42
Something like that is working for me for about half a year. If you need "match ip src", use "at 12" instead of "at 16".
HTH
Signature · 4 lines
Martin Volf _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
----- Original Message -----
From: "Martin Volf" <[email protected]>
To: <[email protected]>
Sent: Monday, November 24, 2003 11:37 PM
Subject: Re: [LARTC] use 3rd octet as hashkey
Quoted 14 lines
Quoted 5 lines · On Mon, 24 Nov 2003 09:52:30 +0530 "Venkatesh. K" <[email protected]>…
Hi,
I want to use 3rd octet in the ip address for creating hashng filters?
How do I do it?
Hi,
what about this (two level hashing with the 3rd and the 4th octet):
Quoted 6 lines
FILTER_ADD="/sbin/tc filter add dev imq0 parent 1:0 protocol ip"
# 1st level - 3rd octet (mask
0x0000ff00)
$FILTER_ADD handle 2: u32 divisor 256
$FILTER_ADD u32 ht 800:: match ip dst 0/0 \
hashkey mask0x0000ff00at 16 link 2:
I had thought about the above line. I have not been able understand hashkey/mask of u32 filter fully as very little documentation is available.
I will try this out.
Thanks for the tip.
Venkatesh K
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/