Skip to contentSkip to conversation

invalid table ID

LARTC Warren Flemmer [email protected] 2 participants 2 messages Nov 3, 2000 – Nov 5, 2000

lore
Share & tools
lore

Warren Flemmer [email protected]

author
#0 lore raw

<PRE>Greetings

The ip route how-to describes the following for setting up source routing

#echo 501 uras.out &gt;&gt; /etc/iproute2/rt_table #ip rule add from 10.0.0.0/24 table uras.out

The first line complains of a missing directory, which is simple fixed (create dir iproute2 in etc)
The second line then reports

Error: argument &quot;uras.out&quot; is wrong: invalid table ID

The op sys is RH 7. I had exactly the same problem with 6.2 and was hoping 7 would solve, but did not. Any ideas?

Regards
Warren

ps
The specs on iproute2 look great. Thanks to all those who contributed. I just wish I could get it working.

</PRE>

#1 lore raw

<PRE>On Fri, Nov 03, 2000 at 04:46:56PM +0200, Warren Flemmer wrote:

&gt;<i> #echo 501 uras.out &gt;&gt; /etc/iproute2/rt_table </I>&gt;<i> #ip rule add from 10.0.0.0/24 table uras.out
</I>&gt;<i>
</I>&gt;<i> The first line complains of a missing directory, which is simple fixed </I>&gt;<i> (create dir iproute2 in etc)
</I>&gt;<i> The second line then reports
</I>&gt;<i>
</I>&gt;<i> Error: argument &quot;uras.out&quot; is wrong: invalid table ID </I>
Try writing to rt_tables instead of rt_table. The HOWTO mentions this correctly.

&gt;<i> The specs on iproute2 look great. Thanks to all those who contributed. I </I>&gt;<i> just wish I could get it working.
</I>
You can now :-)

Regards,

bert hubert

Signature · 6 lines
PowerDNS                     Versatile DNS Services  
Trilab                       The Technology People   
'SYN! .. SYN|ACK! .. ACK!' - the mating call of the internet


</PRE>