Skip to contentSkip to conversation

some basic probs i cant identify !!--:o((

LARTC Arindam Haldar 1 participant 1 message Nov 7, 2000

lore
Share & tools
lore
#0 lore raw

<PRE>hi---first of all thank u HOW-TO(people here think i'm genious)--:o))))

but will someone plzz help me !
here is the netork i have

WEb---|server A|--------|server B|---- my clients
eth0 eth1 eth0 eth1
10.0.0.3/8 0.2/8 0.1/8

the network is on ip 10.0.0.0/8 with eth0 on server A as valid ip from ISP ! serverA runs squid &amp; ipchains while serverB is THE linux router(well want it to be!).
i have recomplied kernel 2.2.17 with all required options on redhat6.2 &amp; have the following script!.... but my clients fail to access web---WHY???

#!/sbin/sh
for f in /proc/sys/net/ipv4/conf/*/rp_filter; do
echo 1 &gt; $f
done
echo 1 &gt; /proc/sys/net/ipv4/ip_forward echo 1 &gt; /proc/sys/net/ipv4/tcp_syncookies for f in /proc/sys/net/ipv4/conf/*/accept_redirects; do
echo 0 &gt; $f
done
for f in /proc/sys/net/ipv4/conf/*/accept_source_route; do
echo 0 &gt; $f
done
######---starting bandwidth
#####-----for eth0
tc qdisc add dev eth0 root handle 10: cbq bandwidth 100Mbit avpkt 1000

tc class add dev eth0 parent 10:0 classid 10:1 cbq bandwidth 100Mbit rate 100Mbit allot 1514 weight 1Mbit prio 8 maxburst 20 avpkt 1500

tc class add dev eth0 parent 10:1 classid 10:100 est 2sec 10sec cbq bandwidth 100Mbit rate 64Kbit allot 1514 weight 1Kbit prio 5 maxburst 20 avpkt 1500 bounded

tc class add dev eth0 parent 10:1 classid 10:200 cbq bandwidth 100Mbit rate 90Mbit allot 1514 weight 9Mbit prio 5 maxburst 20 avpkt 1500 bounded

tc qdisc add dev eth0 parent 10:100 sfq quantum 1514b perturb 30
tc qdisc add dev eth0 parent 10:200 sfq quantum 1514b perturb 15

tc filter add dev eth0 parent 10:0 protocol ip prio 100 u32 match ip src 10.1.4.0/24 flowid 10:100 tc filter add dev eth0 parent 10:0 protocol ip prio 100 u32 match ip src 10.1.61/32 flowid 10:100

tc filter add dev eth0 parent 10:0 protocol ip prio 100 u32 match ip src 10.0.255.0/29 flowid 10:200 tc filter add dev eth0 parent 10:0 protocol ip prio 100 u32 match ip src 10.175.0.0/16 flowid 10:200

....etc..etc....same as given in the how-to !!

my mind is now exhausted to find a reason(which i'm sure is a very basic one)....
one more point to notice is---i want to implement VirtualServers(load balance) between server A &amp; B...well dont have much funds really to go in for those high costing bandwidth at the moment!..

can someone help me plzz with this !
thanking in advance
regards &amp; good luck

arindam

__________________________________________________
Do You Yahoo!?
Thousands of Stores. Millions of Products. All in one Place. <A HREF="http://shopping.yahoo.com/">http://shopping.yahoo.com/</A>

</PRE>