traffic control of incomming traffic
Ilya Golovko [email protected]
<PRE>Hi!
My configuration is very usual.
Internet <== ppp0 = [ linux ] = eth0 ==> LAN
PPP-link is 128k modem. Eth0 is 10Mbit ethernet card. I need to realize fair access for LAN users to internet via shaping incomming ppp traffic (I don't wont to limit speed, only to give each user equal bandwidth). What qdisc is better to use in my case? I know that it is possible to shape only outcomming traffic, i.e. for eth0. What values of parameters like bandwidth, weight should I use in description qdisc ? 10Mbit or 128Kbit?
Ilya Golovko.
Russia.
</PRE>
bert hubert [email protected]
<PRE>On Sat, Jan 13, 2001 at 12:16:29PM +0500, Ilya Golovko wrote:
><i> PPP-link is 128k modem. Eth0 is 10Mbit ethernet card. I need to realize </I>><i> fair access for LAN users to internet via shaping incomming ppp traffic </I>><i> (I don't wont to limit speed, only to give each user equal bandwidth). </I>><i> What qdisc is better to use in my case? I know that it is possible to </I>><i> shape only outcomming traffic, i.e. for eth0. What values of parameters </I>><i> like bandwidth, weight should I use in description qdisc ? 10Mbit or </I>><i> 128Kbit?
</I>
10Mbit - read up on CBQ.init (mentioned in the HOWTO), which sets up a connection like you describe, based on some variables you fill out.
Regards,
bert hubert
Signature · 6 lines
PowerDNS Versatile DNS Services Trilab The Technology People 'SYN! .. SYN|ACK! .. ACK!' - the mating call of the internet </PRE>