Skip to contentSkip to conversation

dscp marking

LARTC Tom Aernoudt [email protected] 1 participant 1 message Jan 17, 2001

lore
Share & tools
lore

Tom Aernoudt [email protected]

author
#0 lore raw

<PRE>
I want to set the DSCP field of the incoming packets. And then put them in the correct queues.

I can mark the packets:

iptables -A OUTPUT -t mangle -d 10.10.10.12 -j MARK --set-mark 1

tc qdisc add dev eth0 handle 1:0 dsmark indices 64 set_tc_index

tc class change dev eth0 classid 1:1 dsmark mask 0x3 value 0xb8

tc filter add dev eth0 parent 1:1 protocol ip prio 1 handle 1 fw
classid 1:1

Or i can set up the queues:

&lt;bigger&gt; #setting root DSMARK

#####################

echo Setting up DSMARK

$TC qdisc add dev $DEV root handle 1:0 dsmark indices 64 set_tc_index

  $TC filter add dev $DEV protocol ip parent 1:0 prio 1 \
      tcindex mask 0xfc shift 2 pass_on

#setting root CBQ

##################

echo Setting up root CBQ

$TC qdisc add dev $DEV parent 1:0 handle 2:0 cbq bandwidth $BANDWIDTH
\

      avpkt 1000 cell 8 mpu 64
  $TC filter add dev $DEV parent 2:0 protocol ip prio 1 \
      tcindex mask 0xf0 shift 4 pass_on

#setting EF

############

echo Setting up EF

$TC class add dev $DEV parent 2:0 classid 2:5 cbq bandwidth $BANDWIDTH
\

      rate $EF_RATE avpkt 1000 prio 1 bounded isolated allot 1514 \

      maxburst 10

$TC qdisc add dev $DEV parent 2:5 pfifo limit 10

  $TC filter add dev $DEV parent 1:0 protocol ip prio 1 \
      handle 0x2e tcindex classid 1:51

$TC filter add dev $DEV parent 2:0 prio 1 handle 5 tcindex classid
2:5

#setting BE

############

echo Setting up BE

$TC class add dev $DEV parent 2:0 classid 2:6 cbq bandwidth $BANDWIDTH
\

rate $BE_RATE avpkt 1000 prio 6 allot 1514 maxburst 21

  $TC qdisc add dev $DEV parent 2:6 red limit 60KB min 15KB max 45KB \

burst 20 avpkt 1000 bandwidth $BANDWIDTH probability 0.4

  $TC filter add dev $DEV parent 1:0 protocol ip prio 1 \
      handle 0x0 tcindex classid 2:161
  $TC filter add dev $DEV parent 2:0 protocol ip prio 1 \

handle 6 tcindex classid 2:6

&lt;/bigger&gt;

But I can't combine the two. What do I have to do to combine these 2?

I tried to do the marking at the ingress but that didn't work.

Thanks,

Tom Aernoudt

</PRE>