Skip to contentSkip to conversation

Trying to do something like the "nice" command, but applied to network traffic

LARTC [email protected] [email protected] 1 participant 1 message Jan 28, 2001

lore
Share & tools
lore
#0 lore raw

<PRE>Hello, i'm quite new to using QoS. I'm trying do to something like what the nice command do, but instead of processes, i'd like to manage bandwidth (of course)

I saw examples in the Howto, describing what to do do divide bandwith, for instance in two parts :

Considering a total bandwidth of 10Mb/s :

2mb is reserved to one interface
8mb is reserved to second interface.

Both are marked &quot;bounded&quot;

Later in the howto, is explained how to let the first interface (which is limited to 2mb/s) to use some of the second interface's bandwidth (which is limited to 8mb/s).. It looks good.. But what I didn't understand is :

If the interface which is limited to 2Mb/s uses bandwidth of the other interface, where is the 2Mb/s limitation ??

Is the bandwidth &quot;borrowed&quot; only if the 8Mb/s limited interface does not use the total of 8 Mb/s ? If it's the case, it's just what I intend to do. If not, can you explain me what does it do?

I hope I was not too long, and was clear enough!

Thanks for your help!

Centaure

</PRE>