linux/tc vs packetshaper
Joakim Recht [email protected]
<PRE>Hi
I was wondering how a Linuxbox running iproute2 and tc to do bandwidth control on a 20 mbit internet connection compares? A Packeteer PacketShaper 4500 costs about $20,000, and a Linuxbox can be set up for much less, but can it be used for a network with some 1000 users without too much trouble?
Following that question, how is the latency affected by a Linux router? The PacketShaper should add no more than 50 msec pr packet, how does Linux compare to this?
If someone has experience with a machine connected to an internetconnection with the same bandwidth, I would like to hear about it very much.
Now, I realize that the Packeteer thing is much easier to configure, and also provides some pretty extensive statistical information, but that is not necessary for me.
yours,
Signature · 8 lines
Joakim Recht Tlf. 20 85 54 77 Email <A HREF="mailto:[email protected]">[email protected]</A> WWW <A HREF="http://www.braindump.dk">http://www.braindump.dk</A> / <A HREF="http://www.compuclub.dk">http://www.compuclub.dk</A> </PRE>
bert hubert [email protected]
<PRE>On Thu, Feb 01, 2001 at 07:07:19PM +0100, Joakim Recht wrote:
><i> Hi
</I>><i>
</I>><i> I was wondering how a Linuxbox running iproute2 and tc to do bandwidth </I>><i> control on a 20 mbit internet connection compares? A Packeteer </I>><i> PacketShaper 4500 costs about $20,000, and a Linuxbox can be set up for </I>><i> much less, but can it be used for a network with some 1000 users without </I>><i> too much trouble?
</I>
Number of users is not that big an issue. We've filtered 90mbit/s of traffic with Linux, but we currently only shape up to 5mbit/s. However, the sites we filter have >100 http connections per second, which each take a few seconds to complete, so I'd guess that at any one time we have ~300 tcp/ip sessions running.
I bet a 1000 users would not come near to that amount of sessions.
><i> Following that question, how is the latency affected by a Linux router? </I>><i> The PacketShaper should add no more than 50 msec pr packet, how does </I>><i> Linux compare to this?
</I>
Well, AFAIK, Packeteers, which used to be quite evil wrt to corrupting IP options by the way!, 'shape' by fooling around with TCP Window options. That does not induce a lot of latency.
Regular shaping might induce more, but it hasn't been a problem for us so far. As long as you are not actively shaping (ie, remain below your bandwidth ceiling), we don't see *any* additional latency.
><i> Now, I realize that the Packeteer thing is much easier to configure, and </I>><i> also provides some pretty extensive statistical information, but that is </I>><i> not necessary for me.
</I>
We've only configured our shaping solution once, using the excellent CBQ.init script. Takes little time, and then runs on without any problems.
Regards,
bert hubert
Signature · 6 lines
PowerDNS Versatile DNS Services Trilab The Technology People 'SYN! .. SYN|ACK! .. ACK!' - the mating call of the internet </PRE>
Joakim Recht [email protected]
<PRE>
bert hubert wrote:
><i>
</I>><i> Number of users is not that big an issue. We've filtered 90mbit/s of traffic </I>><i> with Linux, but we currently only shape up to 5mbit/s. However, the sites we </I>><i> filter have >100 http connections per second, which each take a few seconds </I>><i> to complete, so I'd guess that at any one time we have ~300 tcp/ip sessions </I>><i> running.
</I>><i>
</I>><i> I bet a 1000 users would not come near to that amount of sessions. </I>
Well, I've had to increase /proc/sys/net/ipv4/ip_conntrack_max from 16k
to a larger value on a network with 300 users, so something tells me
that quite a lot of connections are open.
><i>
</I>><i> Regular shaping might induce more, but it hasn't been a problem for us so </I>><i> far. As long as you are not actively shaping (ie, remain below your </I>><i> bandwidth ceiling), we don't see *any* additional latency. </I>
This is the problem for me... The connection is to be distributed between some 8 college dorms, and the users here use quite a lot of bandwidth right now, as we are connected to a university connection. However, we are about to buy our own, which means a pretty crowded 20 mbit connection, and as each dorm should be guaranteed an amount of bandwidth, shaping could occur very often, at least at peak hours in the afternoon/evening.
><i> We've only configured our shaping solution once, using the excellent </I>><i> CBQ.init script. Takes little time, and then runs on without any problems. </I>><i>
</I>><i> Regards,
</I>><i>
</I>><i> bert hubert
</I>><i>
</I>Thanks for your reply,
Signature · 8 lines
Joakim Recht Tlf. 20 85 54 77 Email <A HREF="mailto:[email protected]">[email protected]</A> WWW <A HREF="http://www.braindump.dk">http://www.braindump.dk</A> / <A HREF="http://www.compuclub.dk">http://www.compuclub.dk</A> </PRE>