Skip to contentSkip to conversation

iptables and DSCP

LARTC Pavarani Giovanna [email protected] 3 participants 3 messages Feb 2, 2001

lore
Share & tools
lore

Pavarani Giovanna [email protected]

author
#0 lore raw

<PRE>Talking about DSCP field...

iptables is said to provide all the features of ipchains and something more and better organized, but with ipchains I was able to set all the DSCP values in the TOS field, with iptables it seems this is no more possible, only few values are permitted.

For example:

&gt;<i> iptables -t mangle -A PREROUTING -s 10.0.0.2 -j TOS --set-tos 0xb8 </I>
gives me:

iptables v1.1.2:Bad TOS value '0xb8'

Am I doing something wrong?

Thank you
Regards,
Giovanna Pavarani

&gt;<i>
</I>&gt;<i> On Tue, Jan 23, 2001 at 01:59:00PM +0100, Tom Aernoudt wrote:
</I>&gt;<i> &gt;
</I>&gt;<i> &gt; Isn't it possible with iptables to filter on DSCP field? </I>&gt;<i>
</I>&gt;<i> Why don't you ask this question on the iptables/netfilter mailinglist? </I>&gt;<i>
</I>&gt;<i> Anyway, answer is: No.
</I>&gt;<i>
</I>&gt;<i> Not because the framework isn't capable of that. Just because nobody </I>&gt;<i> implememnted a match yet.
</I>&gt;<i>
</I>&gt;<i> &gt; Thanks,
</I>&gt;<i> &gt; Tom Aernoudt
</I>&gt;<i>
</I>

</PRE>

#1 lore raw

<PRE>On Fri, 2 Feb 2001, Pavarani Giovanna wrote:

&gt;<i> Talking about DSCP field...
</I>&gt;<i>
</I>&gt;<i> iptables is said to provide all the features of ipchains and something more and </I>&gt;<i> better organized, but with ipchains I was able to set all the DSCP values </I>&gt;<i> in the TOS field, with iptables it seems this is no more possible, only few </I>&gt;<i> values are permitted.
</I>&gt;<i>
</I>&gt;<i> For example:
</I>&gt;<i>
</I>&gt;<i> &gt; iptables -t mangle -A PREROUTING -s 10.0.0.2 -j TOS --set-tos 0xb8 </I>&gt;<i>
</I>&gt;<i> gives me:
</I>&gt;<i>
</I>&gt;<i> iptables v1.1.2:Bad TOS value '0xb8'
</I>&gt;<i>
</I>&gt;<i> Am I doing something wrong?
</I>
Yes. You need to specify two values, one and-mask and one or-mask, IIRC.
The new value will be the old value anded with your and-mask and then or-ed with your or-mask.

Doei, Arthur.

Signature · 7 lines
  /\    / |      <A HREF="mailto:[email protected]">[email protected]</A>      | Work like you don't need the money
 /__\  /  | A friend is someone with whom | Love like you have never been hurt
/    \/__ | you can dare to be yourself   | Dance like there's nobody watching



</PRE>
#2 lore raw
In reply to Pavarani Giovanna [email protected]

<PRE>On Fri, 2 Feb 2001, Pavarani Giovanna wrote:

&gt;<i> Talking about DSCP field...
</I>&gt;<i>
</I>&gt;<i> iptables is said to provide all the features of ipchains and something more and </I>&gt;<i> better organized, but with ipchains I was able to set all the DSCP values </I>&gt;<i> in the TOS field, with iptables it seems this is no more possible, only few </I>&gt;<i> values are permitted.
</I>&gt;<i>
</I>&gt;<i> For example:
</I>&gt;<i>
</I>&gt;<i> &gt; iptables -t mangle -A PREROUTING -s 10.0.0.2 -j TOS --set-tos 0xb8 </I>&gt;<i>
</I>&gt;<i> gives me:
</I>&gt;<i>
</I>&gt;<i> iptables v1.1.2:Bad TOS value '0xb8'
</I>&gt;<i>
</I>&gt;<i> Am I doing something wrong?
</I>
Nope. Look into linux/ip.h as all the &quot;legal&quot; values are defined there and maintained there. I hacked on TOS to make the FTOS module available
through the patch-o-matic. FTOS will allow you to set any value between 0-255 into the DSCP field. But it will not check if a value already
exists. The syntax is:

iptables -t mangle -A PREROUTING -s 10.0.0.2 -j FTOS --set-ftos 0xab

If all you are looking to do is set the field to any value that will work
- also works in the POSTROUTING chain for outgoing. Enjoy.

&gt;<i> Thank you
</I>&gt;<i> Regards,
</I>&gt;<i> Giovanna Pavarani
</I>&gt;<i>
</I>&gt;<i>
</I>&gt;<i> &gt;
</I>&gt;<i> &gt; On Tue, Jan 23, 2001 at 01:59:00PM +0100, Tom Aernoudt wrote:
</I>&gt;<i> &gt; &gt;
</I>&gt;<i> &gt; &gt; Isn't it possible with iptables to filter on DSCP field? </I>&gt;<i> &gt;
</I>&gt;<i> &gt; Why don't you ask this question on the iptables/netfilter mailinglist? </I>&gt;<i> &gt;
</I>&gt;<i> &gt; Anyway, answer is: No.
</I>&gt;<i> &gt;
</I>&gt;<i> &gt; Not because the framework isn't capable of that. Just because nobody </I>&gt;<i> &gt; implememnted a match yet.
</I>&gt;<i> &gt;
</I>&gt;<i> &gt; &gt; Thanks,
</I>&gt;<i> &gt; &gt; Tom Aernoudt
</I>&gt;<i> &gt;
</I>&gt;<i>
</I>
--------------------------------------------------
Matthew G. Marsh, President
Paktronix Systems LLC
1506 North 59th Street
Omaha NE 68104
Phone: (402) 932-7250
Email: <A HREF="mailto:[email protected]">[email protected]</A>
WWW: <A HREF="http://www.paktronix.com">http://www.paktronix.com</A>
--------------------------------------------------

</PRE>