Skip to contentSkip to conversation

tc & u32 --> to match PORTS (HTTP & FTP)

LARTC Rick Goh Siow Mong [email protected] 1 participant 1 message Feb 3, 2001

lore
Share & tools
lore

Rick Goh Siow Mong [email protected]

author
#0 lore raw

<PRE>Hello all,
I was trying to allocate to a couple of ports (HTTP and FTP) with the following codes:

tc filter add dev $device parent 2:0 prio 3 protocol ip u32 tc filter add dev $device parent 2:0 prio 3 handle 1: u32 divisor 256 tc filter add dev $device parent 2:0 prio 3 handle 2: u32 divisor 256 ###To match to IP and ports 80 (0x50) and 21 (0x15)
tc filter add dev $device parent 2:0 prio 3 u32 ht 1:6: match ip dst

192.168.1.20 \
    match tcp dst 0x50 0xff flowid 2:2
tc filter add dev $device parent 2:0 prio 3 u32 ht 2:6: match ip dst
192.168.1.20 \
    match tcp dst 0x15 0xff flowid 2:3

Am i missing something here??
Somehow, it doesnt work. I know there's another way which is to use ipchains. But however, i hope to get this way of using hash tables to work.

Regards.

</PRE>