limiting across singular ip's
Hi list,
I'm trying to limit the bandwidth for individual ip's on a network and I can't seem to get it to work...
I thought that maybe doing this as the final line may make it work:
tc filter add dev eth1 parent 10:0 protocol ip prio 100 u32 match ip dst 192.168.1.2/32 flowid 10:100
tc filter add dev eth1 parent 10:0 protocol ip prio 100 u32 match ip dst 192.168.1.3/32 flowid 10:100
...
etc
but its not, what it is doing is limiting the entire 192.168.1.x subnet with the rate that I set...
Is there anything that specifically needs to be added for it to limit to the individual IP's I set?
- Scott
Signature · 14 lines
------------------------------------------------------------ Scott Smith Systems Support SE Network Access Pty Ltd 222 Grote Street Adelaide SA 5000 Tel:08 8221 5221 Fax:08 8221 5220 Support:08 8221 5792 [email protected] http://www.senet.com.au _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/