policy routing
Hello,
I'm trying to route packets based on 'mark' numbers i give to packets according to their port number using iptables. I'm having real trouble setting up routes based on this. I'm issuing the following commands assuming i have marked packets of a certain type with a 1:
echo 201 first.table >> /etc/iproute2/rt_tables
ip rule add fwmark 1 table first.table
ip route add 30.0.0.0/8 dev eth0 table first.table
Basically its just like the exampls in the How To. I have to use Linux kernel v-2.3.99-pre7, so am using iptables 1.0.0.
when i attempt to mark ICMP packets i get 'network unreachable' when i ping another machine on our testbed which is not on the same subnet i.e not 30.0.0.x
Can anyone help?
ThanKs!
Greg.
Signature · 8 lines
---------------------- Gregory OSINAIKE ([email protected]) Electronic Engineering Department Queen Mary and Westfield College _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 12 lines · Gregory OSINAIKE
Hello,
I'm trying to route packets based on 'mark' numbers i give to packets according to their port number using iptables. I'm having real trouble setting up routes based on this. I'm issuing the following commands assuming i have marked packets of a certain type with a 1:
echo 201 first.table >>
/etc/iproute2/rt_tablesip rule add fwmark 1 table first.table
Quoted 8 lines
ip route add 30.0.0.0/8 dev eth0 table first.table
Basically its just like the exampls in the How To. I have to use Linux kernel v-2.3.99-pre7, so am using iptables 1.0.0.
when i attempt to mark ICMP packets i get 'network unreachable' when i ping another machine on our testbed which is not on the same subnet i.e not 30.0.0.x
You also need to define a default gateway for marked packets then, I think.
Regards,
bert
Signature · 7 lines
http://www.PowerDNS.com Versatile DNS Services Trilab The Technology People 'SYN! .. SYN|ACK! .. ACK!' - the mating call of the internet _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Hello
I am newbie with iproute2.
I have redhat 6.2 with 2 default gateways:
[...]
$IP route add default nexthop via 200.47.43.254 dev eth1 weight 2 nexthop \
via 200.41.233.209 dev eth2 weight 1
now i want to force all outgoing connection to irc port (6667) use 200.47.43.254 as gw.
any idea?
Signature · 7 lines
Best regards, Fabian mailto:[email protected] _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 8 lines · Fabian Gervan
Hello
I am newbie with iproute2.
I have redhat 6.2 with 2 default gateways:
[...]
$IP route add default nexthop via 200.47.43.254 dev eth1 weight 2 nexthop \
via 200.41.233.209 dev eth2 weight 1now i want to force all outgoing connection to irc port (6667) use 200.47.43.254 as gw.
fwmark all packets going to port 6667, and then use 'ip rule add fwmark 1 table 200'
and then:
'ip route add default via 200.47.43.254 dev eth1 table 200'
To mark, see
http://ds9a.nl/lartc/HOWTO//cvs/2.4routing/output/2.4routing-11.html
Good luck!
Regards,
bert
Signature · 8 lines
http://www.PowerDNS.com Versatile DNS Software & Services Trilab The Technology People Netherlabs BV / Rent-a-Nerd.nl - Nerd Available - 'SYN! .. SYN|ACK! .. ACK!' - the mating call of the internet _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Hello,
i am using suse-linux 8.0 and i am trying to get this to work:
eth0 = local network
ppp0 = dsl modem
ippp0= isdn-card
network traffic coming from eth0 and going to ppp0 by default
network traffic to dport25 is routed to ippp0 (dynamic-ip)
the traffic from eth0 to ppp0 is working
but the configuration for ippp0 is killing me :-(
marking the pakets:
# iptables -A PREROUTING -i eth0 -t mangle -p tcp --dport 25 \ -j MARK --set-mark 1
configuring the policy routing database:
# echo 201 mail.out >> /etc/iproute2/rt_tables # ip rule add fwmark 1 table mail.out # ip rule ls 0: from all lookup local 32764: from all fwmark 1 lookup mail.out 32766: from all lookup main 32767: from all lookup default
and at last the mail.out table with the route to ippp0, but that´s my
problem: (i think)
# ip route add default dev ippp0 table mail.out
when i am now sending a mail (port25) ippp0 is dialing, but then the route
is deleted, so i set the route again manual with the above command, but the mail is not delivered
i have tryed to route the pakets back to my local net to the external isdn-router:
# ip route add default via 192.168.21.10 dev eth0 table mail.out
this is working!!!
where do i fail?
when i try to set "default route" in the isdn configuration my default route to the dsl
connection is deleted
I hope somebody can help me
regards,
stefan
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/