"onlink" option for ip route
Quoted 3 lines · you
Have a look to "Tunnels over IP in Linux-2.2" (ip-tunnels.ps, part of the iproute package). They use 'onlink' to switch off the consistency check for gateway reachability during tunnel setup.
Please, couldn't you summarize the meaning of "onlink" option? Is it
necessary or could I remove it in my multipath setting? See my former posts; basically it's a default route with two nexthops for traffic balancing between them:
linux balancer --> gatewayY
(192.168.0.1) (192.168.5.Y)
(where Y= 1, 2)
Balancer as well as gateway's are all connected to the same switch.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
** RoMaN SoFt / LLFB **
[email protected]
http://pagina.de/romansoft
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/