Stealth Router
Hi,
in FreeBSD kernel is options that make router stealth, packet passed throw router have no change in TTL value.
Is a posibility to make similar thing in Linux, I think that in traceroute isn't this hop, no asteris, no router, no change in TTL, nothing ...?
PSIkappa
[email protected]
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 5 lines · M.F. PSIkappa
Hi,
in FreeBSD kernel is options that make router stealth, packet passed throw router have no change in TTL value.
Is a posibility to make similar thing in Linux, I think that in traceroute isn't this hop, no asteris, no router, no change in TTL, nothing ...?
There are multiple ways to achieve this.
* The Ethernet Frame Diverter which allows you to operate as a transparent bridge. The URL is in the HOWTO
* The TTL target in iptables. This allows you to raise the TTL again, so nobody might see your router. If you disallow certain ICMP Port Unreachable messages, I think your router won't appear in traceroute. You need to use proxy arp tricks to draw packets into your router if you want it to be totally transparent.
Regards,
bert
Signature · 7 lines
http://www.PowerDNS.com Versatile DNS Services Trilab The Technology People 'SYN! .. SYN|ACK! .. ACK!' - the mating call of the internet _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 1 line · Konrads Smelkov
Can someone be more specific about ttl target? In manual there isn't anything matching TTL...
It's in the iptables-1.2.1a release:
EXTRA EXTENSIONS
The following extensions are not included by default in the standard distribution.
ttl
This module matches the time to live field in the IP header.
--ttl ttl
Matches the given TTL value.
TTL
This target is used to modify the time to live field in the IP header. It is only valid in the mangle table.
--ttl-set ttl
Set the TTL to the given value.
--ttl-dec ttl
Decrement the TTL by the given value.
--ttl-inc ttl
Increment the TTL by the given value.
Regards,
bert
Signature · 7 lines
http://www.PowerDNS.com Versatile DNS Services Trilab The Technology People 'SYN! .. SYN|ACK! .. ACK!' - the mating call of the internet _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/