Policy routing - tables not working
Hello,
Simple question.
When i place a route in 'main' table packets are sent. When i place the same route in my table and make a rule to look up this table when packets match rule, the packets are not sent ('network unreachable').
The rule mathces packets with fwmark 1
(ip rule fwmark 1 table mail)
table mail has a route to subnet 50/8 via 30.0.0.1 (ip route add 50/8 via 30.0.0.1)
Have checked and packets are being marked correctly.
Have tried policy rouign with source address and still did not work.
Using linux -2.3.99-pre7
Have set up /etc/iproute2/rt_tables file
Any help would be appreciated.
Greg.
Signature · 8 lines
---------------------- Gregory OSINAIKE ([email protected]) Electronic Engineering Department Queen Mary and Westfield College _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 6 lines · Gregory OSINAIKE
table mail has a route to subnet 50/8 via 30.0.0.1 (ip route add 50/8 via 30.0.0.1)
Have checked and packets are being marked correctly.
Have tried policy rouign with source address and still did not work.
Show your exact commandlines, your setup is not entirely clear to me.
Regards,
bert
Signature · 7 lines
http://www.PowerDNS.com Versatile DNS Services Trilab The Technology People 'SYN! .. SYN|ACK! .. ACK!' - the mating call of the internet _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/