Problem with routing,NAT and proxy arp
Hello,
I'd like to NATed some friends boxes into our network.
[ISP Router]---(Corp. LAN)---[[MY BOX with NAT]]-----(lan with friends)
1.1.1.1/24 1.1.1.4/24 eth0 172.18.1.0/24
172.18.1.254/24 eth1
My seting:
I use kernel 2.4.2, iptables version 1.2
root@pokus:~# iptables -t nat -L -n Chain PREROUTING (policy ACCEPT) target prot opt source destination DNAT all -- 0.0.0.0/0 1.1.1.17 to:172.18.1.4
Chain POSTROUTING (policy ACCEPT)
target prot opt source destination SNAT all -- 172.18.1.4 0.0.0.0/0 to:1.1.1.17
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
I add arp proxy on eth0 with
ip neigh add proxy 1.1.1.17 dev eth0
With command arp -a -n I see this arp proxy but with ip neigh show I don't see this one.
I test connection with ping, in tcpdump output I see that 172.18.1.4 is right NATed to 1.1.1.17 and icmp request go out to the Corp. LAN. I think that something is wrong with proxy arp because ping from some box on Corp. LAN don't reach 1.1.1.17
What's wrong on my setup ?
PSIkappa
[email protected]
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/