Skip to contentSkip to conversation

BandWidth

LARTC Vitor Carlos Flausino 6 participants 8 messages Apr 3, 2001 – Dec 9, 2002

lore
Share & tools
lore
#0 lore raw

Hi!
I'm using class based queueing for testing how same applications work with low bandwidth. So what I did was give this commands:

tc qdisc add dev eth0 root handle 10: cbq bandwidth 4kbit avpkt 1000 tc qdisc add dev eth1 root handle 20: cbq bandwidth 4kbit avpkt 1000

tc class add dev eth0 parent 10:0 classid 10:1 cbq bandwidth 4kbit rate 4kbit allot isolated
tc class add dev eth1 parent 20:0 classid 20:1 cbq bandwidth 4kbit rate 4kbit allot isolated

tc qdisc add dev eth0 parent 10:0 sfq quantum 1514b tc qdisc add dev eth1 parent 20:0 sfq quantum 1514b

tc filter add dev eth0 parent 10:0 protocol ip u32 match ip dst 192.0.0.0/8 flowid 10:1
tc filter add dev eth1 parent 20:0 protocol ip u32 match ip dst 57.0.0.0/8 flowid 20:1

(has you can see I'm testing with bandwidth = 4k)

Now, WHY DOES NOT WORK? It seams that it using all 100Mbits

____________ ____________
( ) ( )
(57.227.234.0/23)--------|Linux|---------(192.168.76.0/24)
(____________) eth0 eth1 (____________)

                  57.227.235.12
                            192.168.76.1

thanks
-vcf

begin:vcard
n:Flausino;Vitor
tel;cell:+351.96 691 6079
tel;fax:+351.21 842 5534
tel;work:+351.21 842 5688
x-mozilla-html:FALSE
org:PGA-Portugalia Airlines;IT
version:2.1
email;internet:[email protected]
title:Eng
adr;quoted-printable:;;Aeroporto de Lisboa=0D=0ARua C=3BEdf 70;Lisbon;;1749-078 Lisbon;Portugal x-mozilla-cpt:;0
fn:Vitor Carlos Flausino
end:vcard

#1 lore raw
Quoted 8 lines · Stef Coene

Try this :
tc qdisc add dev eth0 root handle 10: cbq bandwidth 10mbit avpkt 1000>

                                                    ~~~~~~
tc class add dev eth0 parent 10:0 classid 10:1 cbq bandwidth 10mbit rate
                                                             ~~~~~~
rate 4kbit allot bounded isolated
                 ~~~~~~~
Quoted 24 lines

Staf

Quoted 21 lines · Vitor Carlos Flausino

Hi!
I'm using class based queueing for testing how same applications work with low bandwidth. So what I did was give this commands:

tc qdisc add dev eth0 root handle 10: cbq bandwidth 4kbit avpkt 1000 tc qdisc add dev eth1 root handle 20: cbq bandwidth 4kbit avpkt 1000

tc class add dev eth0 parent 10:0 classid 10:1 cbq bandwidth 4kbit rate 4kbit allot isolated
tc class add dev eth1 parent 20:0 classid 20:1 cbq bandwidth 4kbit rate 4kbit allot isolated

tc qdisc add dev eth0 parent 10:0 sfq quantum 1514b tc qdisc add dev eth1 parent 20:0 sfq quantum 1514b

tc filter add dev eth0 parent 10:0 protocol ip u32 match ip dst 192.0.0.0/8 flowid 10:1
tc filter add dev eth1 parent 20:0 protocol ip u32 match ip dst 57.0.0.0/8 flowid 20:1

Thanks but it did not solve.... It still works 100mbit

tc qdisc add dev eth0 root handle 10: cbq bandwidth 100mbit avpkt 1000 tc qdisc add dev eth1 root handle 20: cbq bandwidth 100mbit avpkt 1000

tc class add dev eth0 parent 10:0 classid 10:1 cbq bandwidth 100mbit rate 4kbit allot 1514 bounded isolated

tc class add dev eth1 parent 20:0 classid 20:1 cbq bandwidth 100mbit rate 4kbit allot 1514 bounded isolated

tc qdisc add dev eth0 parent 10:0 sfq quantum 1514b perturb 15 tc qdisc add dev eth1 parent 20:0 sfq quantum 1514b perturb 15

tc filter add dev eth0 parent 10:0 protocol ip u32 match ip dst 192.0.0.0/8 flowid 10:1
tc filter add dev eth1 parent 20:0 protocol ip u32 match ip dst 57.0.0.0/8 flowid 20:1

-vcf

begin:vcard
n:Flausino;Vitor
tel;cell:+351.96 691 6079
tel;fax:+351.21 842 5534
tel;work:+351.21 842 5688
x-mozilla-html:FALSE
org:PGA-Portugalia Airlines;IT
version:2.1
email;internet:[email protected]
title:Eng
adr;quoted-printable:;;Aeroporto de Lisboa=0D=0ARua C=3BEdf 70;Lisbon;;1749-078 Lisbon;Portugal x-mozilla-cpt:;0
fn:Vitor Carlos Flausino
end:vcard

#2 lore raw

[LARTC] bandwidth

In reply to Vitor Carlos Flausino

hi all,
how r bandwidth allocated in cable modem internet access technology when new subscribers are added or how is it allocated basically?
could someone help me on this
vijaya

__________________________________________________
Do You Yahoo!?
Yahoo! Auctions - buy the things you want at great prices
http://auctions.yahoo.com/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

#3 lore raw

[LARTC] Bandwidth

In reply to Vitor Carlos Flausino

I am really curious how loaded (current and average upload/download speed) is your network and how fast connection you have.
(This question is more for more networked enviroments rather than single users).

We just bought 8mbit/s line and the load wont get higher than 200KB/s (~1.6Mbit/s) (according to MRTG)
There are ~250 users using this line. (shaped from 32kbit/s to 2mbit/s)

I am using MRTG to measure the load.
I though MRTG has gone crazy showing 200KB/s so i decided to download large amount of data. And no, the mrtg was right, i was downloading at 600KB/s and MRTG showed the same.

I am confused how it is possible.

P.Krumins
____________________________________________________________

Reìistrç un lieto savu Apollo e-pastu www.e-apollo.lv

www.apollo.lv

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#4 lore raw

Re: [LARTC] Bandwidth

In reply to Vitor Carlos Flausino

You need to ensure that you are downloading from a server capable of serving 8Mbits (most are not).

In the continental USA I use gatekeeper.dec.com, which is very lightly loaded (nobody remembers it these days) and has at least an OC-3 connection.
I have seen 40Mbits/s via FTP from this machine.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#5 lore raw

RE: [LARTC] Bandwidth

In reply to Vitor Carlos Flausino

We are running with an 8 Mbit WAN link and are using wrr to shape the traffic between 800 users. This works fine and all the bandwith are en use most of the time.

Please supply some more details of your configuration, if you want more help.

--
Morten Isaksen
[email protected] - http://www.aub.dk/~misak

Quoted 2 lines

-----Original Message-----
From: [email protected] [mailto:[email protected]]

On

Quoted 6 lines

Behalf Of [email protected]
Sent: 9. december 2002 21:24
To: [email protected]
Subject: [LARTC] Bandwidth

I am really curious how loaded (current and average upload/download

speed)

Quoted 3 lines

is your network
and how fast connection you have.
(This question is more for more networked enviroments rather than

single

Quoted 6 lines

users).

We just bought 8mbit/s line and the load wont get higher than 200KB/s (~1.6Mbit/s) (according
to MRTG)
There are ~250 users using this line. (shaped from 32kbit/s to

2mbit/s)

Quoted 5 lines

I am using MRTG to measure the load.
I though MRTG has gone crazy showing 200KB/s so i decided to download large amount of data.
And no, the mrtg was right, i was downloading at 600KB/s and MRTG

showed

Quoted 8 lines

the same.

I am confused how it is possible.

P.Krumins
____________________________________________________________

Quoted 7 lines

Re»istrº un lieto savu Apollo e-pastu www.e-apollo.lv

www.apollo.lv

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#6 lore raw

Re: [LARTC] Bandwidth

In reply to Vitor Carlos Flausino
Quoted 3 lines · Morten Isaksen

We are running with an 8 Mbit WAN link and are using wrr to shape the traffic between 800 users. This works fine and all the bandwith are en use most of the time.

Sorry to break in to the thread like this, but...

1. Is it one single 8/8Mb link?
2. Hows the tc configuration? (Like the example in the wrr-package?)
3. Are there any latency-problems?
4. What measures has been taken to ensure low latency?

<SNIP>

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#7 lore raw

RE: [LARTC] Bandwidth

In reply to Vitor Carlos Flausino
Quoted 9 lines

-----Original Message-----
From: Steen Suder, privat [mailto:[email protected]]
Sent: 9. december 2002 22:16
To: Morten Isaksen
Cc: [email protected]
Subject: Re: [LARTC] Bandwidth

Quoted 1 line · Morten Isaksen

We are running with an 8 Mbit WAN link and are using wrr to shape

the

Quoted 1 line
Quoted 1 line

traffic between 800 users. This works fine and all the bandwith are

en

Quoted 5 lines
Quoted 1 line

use most of the time.

Sorry to break in to the thread like this, but...

1. Is it one single 8/8Mb link?

Yes. We do have 2 1 Mbit ADSL lines also, but they are only used for P2P traffic (like Kazaa, Napster, ..).

Quoted 1 line

2. Hows the tc configuration? (Like the example in the wrr-package?)

I have used the standard script in the wrr package, with some minor changes like changed ..cbq bandwidth 10Mbit.. to .. cbq bandwidth 100Mbit..

Quoted 2 lines

3. Are there any latency-problems?
4. What measures has been taken to ensure low latency?

Right now our WAN link is at 96% and I have a latency about 10 ms to a server 8 hops away (through the Danish DIX). So no, we don't have any latency problems.

--
Morten Isaksen
[email protected] - http://www.aub.dk/~misak

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/