Skip to contentSkip to conversation

bandwith limit does not work

LARTC Joost A. Schildwacht 1 participant 1 message Apr 3, 2001

lore
Share & tools
lore
#0 lore raw

Hi all,

now that iproute2 is running;

got the following problem using the configuration;

ip internet 10.0.0.1 eth0 ---- linux ----eth1 192.168.0.12 LAN (2 machines connected)

machine 1: 192.168.0.11 (gateway 192.168.0.1.12) --> should only get 128kbit (downstream bounded to bandwith machine 28+256)
machine 2: 192.168.0.199 (gateway 192.168.0.1.12) --> should only get 256kbit downstream

tc command:

tc qdisc add dev eth1 root handle 20: cbq bandwidth 10Mbit avpkt 1000 tc class add dev eth1 parent 20:0 classid 20:1 cbq bandwidth 10Mbit rate 10Mbit allot 1514 weight 1Mbit prio 8 maxburst 20 avpkt 1000 tc class add dev eth1 parent 20:1 classid 20:100 cbq bandwidth 10Mbit rate 128Kbit allot 1514 weight 128Kbit prio 5 maxburst 20 avpkt 1000 bounded tc class add dev eth1 parent 20:1 classid 20:200 cbq bandwidth 10Mbit rate 256Kbit allot 1514 weight 256Kbit prio 5 maxburst 20 avpkt 1000 tc qdisc add dev eth1 parent 20:100 sfq quantum 1514b perturb 15 tc qdisc add dev eth1 parent 20:200 sfq quantum 1514b perturb 15 tc filter add dev eth1 parent 20:0 protocol ip prio 100 u32 match ip src 192.168.0.12 flowid 20:200
tc filter add dev eth1 parent 20:0 protocol ip prio 25 u32 match ip src 192.168.0.199 flowid 20:100

tc accepts all commands..
so I tried to download a file, for some reason both machines get max bandwith (1Mb) and not the bandwith limit. Did I do something wrong?

Joost Schildwacht

Ps. Is there a command line option to delete the lines without rebooting the system? something like tc delete dev eth1...

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/