routing problem with multiple connections
hello;
here is the problem.
i have a laptop running linux-2.4.3 with three wireless ethernet cards installed and an actual ethernet card acting as a router.
eth0 connects to the wired ethernet in my home.
eth1 connects to the first orinoco card which is the local wireless cell this is in home use.
eth2 connects to the second orinoco card which has and 24dbi gain parabolic directional antennea and will eventually be a 512mbs connection to the internet.
eth3 connects to the third orinoco card which has an external antennea so i am able to sit outside and work on the computers.
any computers on the wired ethernet are able to ping the laptop router but are unable to ping any wireless computer.
any computer on the local in home wireless are able to ping the laptop router but are unable to ping any computer on the wired ethernet.
any computer on the wireless networks with external antennea is able to ping any other wireless computers and the laptop router but unable to ping the wired ethernet computers.
the ip numbers are valid internet numbers. it is my legacy class c ip range. there are no subnets.
all wireless cards are in ad-hoc mode with 128bit encryption enabled.
i am trying to route any wireless computer to the wired ethernet.
i am trying to route the wired ethernet to eth2 as internet default gateway.
what am i missing?
Signature · 14 lines
Terry L. Ridder Blue Danube Artistic Forge (Blaue Donau Kunstschmiede) "We do not bend metal, we sculpt it." digging deep, i feel my conscience burn i need to know who and what i am this hunger jolts me from complacency rocks me, makes me meet myself ----kendall payne---closer to myself--- _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
hello;
i may have found part of the problem.
each interface in the laptop router has
an unique ip address. i.e.
eth0 = x.y.z.202
eth1 = x.y.z.208
eth2 = x.y.z.209
eth3 = x.y.z.210
in rereading the linux wireless howto
the example router has the same ip address
on all interface. i.e.
eth0 = x.y.z.202 netmask 255.255.255.255
eth1 = x.y.z.202 netmask 255.255.255.255
eth2 = x.y.z.202 netmask 255.255.255.255
eth3 = x.y.z.202 netmask 255.255.255.255
with a default route on eth2.
i would assume that eth0, eth1, and eth3
are all proxy-arped.
On Fri, 6 Apr 2001, [email protected] wrote:
terrylr> hello;
terrylr>
terrylr> here is the problem.
terrylr>
terrylr> i have a laptop running linux-2.4.3 with three wireless terrylr> ethernet cards installed and an actual ethernet card terrylr> acting as a router.
terrylr>
terrylr> eth0 connects to the wired ethernet in my home. terrylr>
terrylr> eth1 connects to the first orinoco card which is terrylr> the local wireless cell this is in home use. terrylr>
terrylr> eth2 connects to the second orinoco card which has terrylr> and 24dbi gain parabolic directional antennea and terrylr> will eventually be a 512mbs connection to the internet. terrylr>
terrylr> eth3 connects to the third orinoco card which has terrylr> an external antennea so i am able to sit outside and terrylr> work on the computers.
terrylr>
terrylr> any computers on the wired ethernet are able to ping terrylr> the laptop router but are unable to ping any wireless terrylr> computer.
terrylr>
terrylr> any computer on the local in home wireless are able terrylr> to ping the laptop router but are unable to ping terrylr> any computer on the wired ethernet.
terrylr>
terrylr> any computer on the wireless networks with external terrylr> antennea is able to ping any other wireless computers terrylr> and the laptop router but unable to ping the wired terrylr> ethernet computers.
terrylr>
terrylr> the ip numbers are valid internet numbers. it is terrylr> my legacy class c ip range. there are no subnets. terrylr>
terrylr> all wireless cards are in ad-hoc mode with 128bit terrylr> encryption enabled.
terrylr>
terrylr> i am trying to route any wireless computer to the terrylr> wired ethernet.
terrylr>
terrylr> i am trying to route the wired ethernet to eth2 terrylr> as internet default gateway.
terrylr>
terrylr> what am i missing?
terrylr>
terrylr>
Signature · 14 lines
Terry L. Ridder Blue Danube Software (Blaue Donau Software) "We do not write software, we compose it." digging deep, i feel my conscience burn i need to know who and what i am this hunger jolts me from complacency rocks me, makes me meet myself ----kendall payne---closer to myself--- _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/