Skip to contentSkip to conversation

LARTC digest, Vol 1 #157 - 11 msgs

LARTC xerid 2 participants 3 messages Apr 6, 2001

lore
Share & tools
lore
author
#1 lore raw

ok, so "ip" just controls the default flow of data, while "iptables" controls the access authority.

I think that's right.......
thanks

:)

Quoted 14 lines · Arthur van Leeuwen
Quoted 4 lines · xerid

Hello,
I was wondering what the difference is between the commands "ip"
and "iptables", and what's better. I know "iptables" is new to kernel 2.4. I've asked this question before, but didnt get a response.

There is no better. 'ip' gives you access to the TCP/IP stack's settings, 'iptables' gives you access to the iptables firewalling code. These are two completely different things.

Doei, Arthur.

Signature · 3 lines
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
#2 lore raw
In reply to xerid
Quoted 4 lines · xerid

Hello,
I was wondering what the difference is between the commands "ip"
and "iptables", and what's better. I know "iptables" is new to kernel 2.4. I've asked this question before, but didnt get a response.

There is no better. 'ip' gives you access to the TCP/IP stack's settings, 'iptables' gives you access to the iptables firewalling code. These are two completely different things.

Doei, Arthur.

Signature · 8 lines
  /\    / |      [email protected]      | Work like you don't need the money
 /__\  /  | A friend is someone with whom | Love like you have never been hurt
/    \/__ | you can dare to be yourself   | Dance like there's nobody watching


_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/