Skip to contentSkip to conversation

help

LARTC Ravikanth Samprathi 6 participants 6 messages Apr 10, 2001 – Jan 11, 2007

lore
Share & tools
lore
#0 lore raw

Hi all,
I am running linux-2.4.0 with
3 interfaces - eth0, eth1, and eth2.

eth0 is the outgoing WAN interface. eth1 and eth2 are the internal LAN interfaces. eth1 and eth2 belong to a bridge group br0. eth1 is connected to a voice-over-ip phone. eth2 is connected to a pc.

so, the setup is

                       ------------------------------
	            |                             |
voip-phone --->| eth1  --->               |
	            |	  br0   eth0 -|---WAN
lan-pc ---------->| eth2 ---->               |
                       ------------------------------

voip-phone can talk with lan-pc through-the-bridge-group.
voip phone can also talk with any other phone in the outside-world-through-the-WAN.

I need to setup QoS so that all packets from voip-phone (that is destined to either eth1, eth2 or to eth0) are provided with high-priority-low-delay service. voip-phone can be on any lan-interface (eth1 or eth2). The only thing that can be surely said about the voip-phone is that it will have only a particular set of ip addresses ranging from 171.72.233.100 to 171.72.233.200.

To implement this, i downloaded the iproute2+tc tool version iproute2-2.2.4-now-ss991023.tar.gz and went through the README files.

Can somebody please help me in writing the commands? That will
be of great help.

Thanking you in advance,
ravi

--------------------------------------------------->
Ravi Samprathi work:(408)853-8038
Cisco Systems res :(408)988-2268
Empowering the Internet Generation <---------------------------------------------------

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

#1 lore raw

[LARTC] Help

Im newbie in this traffic shaping and id like to ask if its possible to this. I have a two dsl lines connected to different provider. is it possible that ill configure my linux box so that if other dsl line fails the other one will work on this?

Best Regards,
Glynn

#2 lore raw

Re: [LARTC] Help

In reply to Ravikanth Samprathi
Quoted 4 lines · glynn

Im newbie in this traffic shaping and id like to ask if its possible to this. I have a two dsl lines connected to different provider. is it possible that ill configure my linux box so that if other dsl line fails the other one will work on this?

Well, yes and no. The problem is that 'working' or 'not-working' may be hard to detect. The router may be up, but not connected to anything. The only thing Linux can see is if the default gateway doesn't respond to ARPs anymore, when it becomes a 'dead gateway'.

Your best bet is to run a script from cron that pings some remote hosts to figure out which link is up, and set routes accordingly.

Regards,

bert

Signature · 7 lines
http://www.PowerDNS.com          Versatile DNS Software & Services
http://www.tk                              the dot in .tk
Netherlabs BV / Rent-a-Nerd.nl           - Nerd Available -
Linux Advanced Routing & Traffic Control: http://ds9a.nl/lartc
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
#3 lore raw

[LARTC] Help

In reply to Ravikanth Samprathi

Please unsubscribe my ID [email protected] from the mailing list.

Thanks & Regards
Vyas

Quoted 519 lines · [email protected] wrote:

Send LARTC mailing list submissions to
[email protected]

To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.ds9a.nl/mailman/listinfo/lartc
or, via email, send a message with subject or body 'help' to
[email protected]

You can reach the person managing the list at
[email protected]

When replying, please edit your Subject line so it is more specific than "Re: Contents of LARTC digest..."

Today's Topics:

1. iptables MARK (Blagovest Lazarov)
2. Re: iptables MARK (Ramin Alidousti)
3. Re: iptables MARK (Martin A. Brown)
4. Multiple Static Ip's on a adls connection (mike ferguson)
5. RE: Multiple Static Ip's on a adls connection (S Mohan)
6. bandwidth manager using a linux bridge (Paul P. Pongco)
7. ip rule and traceroute (Jacob Teplitsky)
8. dsl latency... (Mattt)
9. Re: dsl latency... (Mattt)

--__--__--

Message: 1
Date: Thu, 03 Oct 2002 17:20:08 +0300
From: Blagovest Lazarov <[email protected]>
Reply-To: [email protected]
Organization: Internet Bulgaria PLC
To: [email protected]
Subject: [LARTC] iptables MARK

Hi,
Please help me. Does somebody know exactly which part of ip header carry iptables MARK?
I would like to mark packets on cisco router and shape it on a linux box. Sorry for the English :)))
Thanks a lot,

Blagovest Lazarov

--__--__--

Message: 2
Date: Thu, 3 Oct 2002 10:56:42 -0400
From: Ramin Alidousti <[email protected]>
To: Blagovest Lazarov <[email protected]>
Cc: [email protected]
Subject: Re: [LARTC] iptables MARK

Quoted 3 lines · Blagovest Lazarov

Hi,
Please help me. Does somebody know exactly which part of ip header carry iptables MARK?

The MARKing is not done on the IP packet itself. It MARKs the internal IP data structure used by the kernel. If you want to mark (note the lower case notation here as opposed to MARK) you can use the TOS field.

Ramin

Quoted 4 lines

I would like to mark packets on cisco router and shape it on a linux box. Sorry for the English :)))
Thanks a lot,

Quoted 8 lines

Blagovest Lazarov

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

--__--__--

Message: 3
Date: Thu, 3 Oct 2002 11:07:39 -0500 (CDT)
From: "Martin A. Brown" <[email protected]>
To: Blagovest Lazarov <[email protected]>
Cc: [email protected]
Subject: Re: [LARTC] iptables MARK

Blagovest,

You are actually desiring to use ToS (Type of Service) markers on the IP packet itself. In order to set ToS, you'll use the -j TOS option to iptables.

http://iptables-tutorial.frozentux.net/iptables-tutorial.html#AEN2530

Good luck,

-Martin

On Thu, 3 Oct 2002, Blagovest Lazarov wrote:

: Hi,
: Please help me. Does somebody know exactly which part of ip header carry iptables : MARK?
: I would like to mark packets on cisco router and shape it on a linux box. : Sorry for the English :)))
: Thanks a lot,
:
: Blagovest Lazarov
:
:
:
:
: _______________________________________________
: LARTC mailing list / [email protected]
: http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
:

--
Martin A. Brown --- SecurePipe, Inc. --- [email protected]

--__--__--

Message: 4
From: "mike ferguson" <[email protected]>
To: <[email protected]>
Date: Thu, 3 Oct 2002 15:10:32 -0700
Subject: [LARTC] Multiple Static Ip's on a adls connection

This is a multi-part message in MIME format.

------=_NextPart_000_0017_01C26AEF.043511B0

Content-Type: text/plain;
        charset="iso-8859-1"

Content-Transfer-Encoding: quoted-printable

Hi all.=20

I have recently signed up with a adsl supplier. I ordered static ip's I = was given a block from 153-158. I am trying to make it so that each = machine gets a live ip address that is accessable on the wan. I am using = floppyfw as my router on a p200. I know that I could setup the the eth0 = as multiple ip's and do nat, but I am wondering if there is another way. = I just want all the machines to have there own ip and have that ip = accessible to the internet with no port blocking or anything..If someone = could help that would be greatly apreciated ------=_NextPart_000_0017_01C26AEF.043511B0

Content-Type: text/html;
        charset="iso-8859-1"

Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1">
<META content=3D"MSHTML 5.50.4919.2200" name=3DGENERATOR> <STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Hi all. </FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV> <DIV><FONT face=3DArial size=3D2>I have recently signed up with a adsl = supplier. I=20
ordered static ip's I was given a block from 153-158. I am trying to = make it so=20
that each machine gets a live ip address that is accessable on the wan. = I am=20
using floppyfw as my router on a p200. I know that I could setup the the = eth0 as=20
multiple ip's and do nat, but I am wondering if there is another way. I = just=20
want all the machines to have there own ip and have that ip accessible = to the=20
internet with no port blocking or anything..If someone could help that = would be=20
greatly apreciated</FONT></DIV></BODY></HTML>

------=_NextPart_000_0017_01C26AEF.043511B0--

--__--__--

Message: 5
Reply-To: <[email protected]>
From: "S Mohan" <[email protected]>
To: "'mike ferguson'" <[email protected]>, <[email protected]>
Subject: RE: [LARTC] Multiple Static Ip's on a adls connection
Date: Fri, 4 Oct 2002 07:18:37 +0530

This is a multi-part message in MIME format.

------=_NextPart_000_0040_01C26B76.43B5B510
Content-Type: text/plain;
charset="US-ASCII"
Content-Transfer-Encoding: 7bit

You need to use destination nat or dnat. I use iptables and iptables can do this. Regarding ipchains, I'm not sure, need to check. Does floppyfw use iptables?

Mohan

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of mike ferguson
Sent: Friday, October 04, 2002 3:41 AM
To: [email protected]
Subject: [LARTC] Multiple Static Ip's on a adls connection

Hi all.

I have recently signed up with a adsl supplier. I ordered static ip's I was given a block from 153-158. I am trying to make it so that each machine gets a live ip address that is accessable on the wan. I am using floppyfw as my router on a p200. I know that I could setup the the eth0 as multiple ip's and do nat, but I am wondering if there is another way. I just want all the machines to have there own ip and have that ip accessible to the internet with no port blocking or anything..If someone could help that would be greatly apreciated

------=_NextPart_000_0040_01C26B76.43B5B510
Content-Type: text/html;
charset="US-ASCII"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; = charset=3Dus-ascii">
<TITLE>Message</TITLE>

<META content=3D"MSHTML 6.00.2600.0" name=3DGENERATOR> <STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><SPAN class=3D640454501-04102002><FONT color=3D#0000ff size=3D2>You = need to use=20
destination nat or dnat. I use iptables and iptables can do this. = Regarding=20
ipchains, I'm not sure, need to check. Does floppyfw use=20 iptables?</FONT></SPAN></DIV>
<DIV><SPAN class=3D640454501-04102002><FONT color=3D#0000ff=20 size=3D2></FONT></SPAN>&nbsp;</DIV>
<DIV><SPAN class=3D640454501-04102002><FONT color=3D#0000ff=20 size=3D2>Mohan</FONT></SPAN></DIV>
<BLOCKQUOTE dir=3Dltr style=3D"MARGIN-RIGHT: 0px">
<DIV></DIV>
<DIV class=3DOutlookMessageHeader lang=3Den-us dir=3Dltr =
align=3Dleft><FONT=20
face=3DTahoma size=3D2>-----Original Message-----<BR><B>From:</B>=20 [email protected] [mailto:[email protected]] <B>On =
Behalf=20
Of </B>mike ferguson<BR><B>Sent:</B> Friday, October 04, 2002 3:41=20 AM<BR><B>To:</B> [email protected]<BR><B>Subject:</B> [LARTC] =
Multiple=20
Static Ip's on a adls connection<BR><BR></FONT></DIV> <DIV><FONT face=3DArial size=3D2>Hi all. </FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV> <DIV><FONT face=3DArial size=3D2>I have recently signed up with a adsl =
supplier. I=20
ordered static ip's I was given a block from 153-158. I am trying to =
make it=20
so that each machine gets a live ip address that is accessable on the =
wan. I=20
am using floppyfw as my router on a p200. I know that I could setup =
the the=20
eth0 as multiple ip's and do nat, but I am wondering if there is =
another way.=20
I just want all the machines to have there own ip and have that ip =
accessible=20
to the internet with no port blocking or anything..If someone could =
help that=20
would be greatly apreciated</FONT></DIV></BLOCKQUOTE></BODY></HTML>

------=_NextPart_000_0040_01C26B76.43B5B510--

--__--__--

Message: 6
From: "Paul P. Pongco" <[email protected]>
To: [email protected]
Date: 04 Oct 2002 10:04:03 +0800
Subject: [LARTC] bandwidth manager using a linux bridge

Hello List,

Has anyone tried doing this using CBQ or HTB? I have seen implementations of firewall(using ipchains and iptables) using a linux bridge.
Thanks.

--
Cheers,

Paul P. Pongco

--__--__--

Message: 7
From: Jacob Teplitsky <[email protected]>
To: [email protected]
Date: Thu, 3 Oct 2002 20:25:19 -0700 (PDT)
Subject: [LARTC] ip rule and traceroute

I'm trying to force traceroute to use non default (not main) routing table, but it doesn't work. Anyclues are appriciated.
Thanks
- Jacob

# ip route get 192.168.2.1
RTNETLINK answers: Network is unreachable
# ip route get 192.168.2.1 from 10.10.10.13
192.168.2.1 from 10.10.10.13 via 10.10.10.1 dev nr0
    cache  mtu 1500 advmss 1460
# traceroute -s 10.10.10.13 192.168.2.1
traceroute to 192.168.2.1 (192.168.2.1) from 10.10.10.13, 30 hops max, 40 byte packets
 1 sendto: Network is unreachable
traceroute: wrote 192.168.2.1 40 chars, ret=-1
# ip rule
0:      from all lookup local
1:      from 10.10.10.13 lookup nr
32766:  from all lookup main
32767:  from all lookup 253
# ip route show table nr
default via 10.10.10.1 dev nr0

--__--__--

Message: 8
From: Mattt <[email protected]>
To: [email protected]
Date: 04 Oct 2002 14:14:29 +1000
Subject: [LARTC] dsl latency...

Hi all,

I've gotten the WonderShaper (slightly modified) running on the
router. We have a 512/128 connection, and I set DOWNLINK=300, UPLINK=100 (the link is currently under-utilised, and huge performance is not required at this stage). All appears well (at least, it's stable), but I have two questions.

Firstly, given that the link is *very* under-utilised, does the
following output look reasonable? It looks as if only qdisc has actually seen traffic :

==========

jenner:/etc/firewall/wondershaper-1.1a# ./wshaper status
qdisc ingress ffff: ----------------
 Sent 0 bytes 0 pkts (dropped 0, overlimits 0)

qdisc sfq 30: quantum 1514b perturb 10sec
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)

qdisc sfq 20: quantum 1514b perturb 10sec
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)

qdisc sfq 10: quantum 1514b perturb 10sec
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)

qdisc cbq 1: rate 10Mbit (bounded,isolated) prio no-transmit
Sent 2896610 bytes 29310 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0

class cbq 1: root rate 10Mbit (bounded,isolated) prio no-transmit
Sent 2896610 bytes 29310 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0
class cbq 1:10 parent 1:1 leaf 10: rate 100Kbit prio 1
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0
class cbq 1:1 parent 1: rate 100Kbit (bounded,isolated) prio 5
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0
class cbq 1:20 parent 1:1 leaf 20: rate 90Kbit prio 2
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0
class cbq 1:30 parent 1:1 leaf 30: rate 80Kbit prio 2
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0
jenner:/etc/firewall/wondershaper-1.1a#
==========

Also, I'm noticing a fair wait before, for instance, downloading a web
site (although the phenomenom is also quite apparent over at least most protocols, though). Say, perhaps, 1 or 2 seconds before *any* page 'instantaneously' appears ;-)

We run our own DNS, as well as a DNS cache (the djbdns package), so
lookups should not be causing a problem (in fact, they're not - this only happens to traffic leaving the DSL interface).

I realise that DSL latency isn't as good as some other technologies,
but is this something I should be able to minimise the effect of?

Admittedly, it sounds to me as if the traffic is still queuing at the
modem - have I simply done something stupid? I'm applying the qdiscs to eth3 rather than ppp0 (as applying them to ppp0 would oops the kernel after less than a minute or two reliably...).

I'm new to lartc, but learning (through necessity). I can't help but
feel that my questions here are actually related - the lack of counter data on the qdiscs, the classic symtoms(?) of DSL latency... Is it even working for me?

--
Cheers,

 Mattt.                      icq   : 117539757
 aboveNetworks               www   : www.above.nq4u.net
 [email protected]        jabber: [email protected]

What's got four legs and an arm? A happy Pit Bull...

--__--__--

Message: 9
Subject: Re: [LARTC] dsl latency...
From: Mattt <[email protected]>
To: [email protected]
Date: 04 Oct 2002 14:24:30 +1000

Was just reading over the script, and remembered that I re-installed it fresh... it's *not* slightly modified as stated below, other than the d/u link numbers... the noprio stuff is all empty...

Quoted 76 lines · Mattt

Hi all,

I've gotten the WonderShaper (slightly modified) running on the
router. We have a 512/128 connection, and I set DOWNLINK=300, UPLINK=100 (the link is currently under-utilised, and huge performance is not required at this stage). All appears well (at least, it's stable), but I have two questions.

Firstly, given that the link is *very* under-utilised, does the
following output look reasonable? It looks as if only qdisc has actually seen traffic :

==========

jenner:/etc/firewall/wondershaper-1.1a# ./wshaper status
qdisc ingress ffff: ----------------
 Sent 0 bytes 0 pkts (dropped 0, overlimits 0)

qdisc sfq 30: quantum 1514b perturb 10sec
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)

qdisc sfq 20: quantum 1514b perturb 10sec
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)

qdisc sfq 10: quantum 1514b perturb 10sec
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)

qdisc cbq 1: rate 10Mbit (bounded,isolated) prio no-transmit
Sent 2896610 bytes 29310 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0

class cbq 1: root rate 10Mbit (bounded,isolated) prio no-transmit
Sent 2896610 bytes 29310 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0
class cbq 1:10 parent 1:1 leaf 10: rate 100Kbit prio 1
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0
class cbq 1:1 parent 1: rate 100Kbit (bounded,isolated) prio 5
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0
class cbq 1:20 parent 1:1 leaf 20: rate 90Kbit prio 2
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0
class cbq 1:30 parent 1:1 leaf 30: rate 80Kbit prio 2
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0
jenner:/etc/firewall/wondershaper-1.1a#
==========

Also, I'm noticing a fair wait before, for instance, downloading a web
site (although the phenomenom is also quite apparent over at least most protocols, though). Say, perhaps, 1 or 2 seconds before *any* page 'instantaneously' appears ;-)

We run our own DNS, as well as a DNS cache (the djbdns package), so
lookups should not be causing a problem (in fact, they're not - this only happens to traffic leaving the DSL interface).

I realise that DSL latency isn't as good as some other technologies,
but is this something I should be able to minimise the effect of?

Admittedly, it sounds to me as if the traffic is still queuing at the
modem - have I simply done something stupid? I'm applying the qdiscs to eth3 rather than ppp0 (as applying them to ppp0 would oops the kernel after less than a minute or two reliably...).

I'm new to lartc, but learning (through necessity). I can't help but
feel that my questions here are actually related - the lack of counter data on the qdiscs, the classic symtoms(?) of DSL latency... Is it even working for me?

--
Cheers,

 Mattt.                      icq   : 117539757
 aboveNetworks               www   : www.above.nq4u.net
 [email protected]        jabber: [email protected]
Quoted 6 lines

What's got four legs and an arm? A happy Pit Bull...

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

--
Cheers,

 Mattt.                      icq   : 117539757
 aboveNetworks               www   : www.above.nq4u.net
 [email protected]        jabber: [email protected]

What's got four legs and an arm? A happy Pit Bull...

Quoted 8 lines

--__--__--

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc

End of LARTC Digest

begin:vcard
n:Diwakar;VedaVyas
tel;cell:98450 61219
tel;work:+91 80 6587116, 6582923
x-mozilla-html:FALSE
org:Yukthi Systems Pvt. Ltd.;www.yukthi.com
adr:;;;;;;
version:2.1
email;internet:[email protected]
title:Manager OPS
fn:VedaVyas Diwakar
end:vcard

#4 lore raw
In reply to Ravikanth Samprathi

lartc-request@mail
man.ds9a.nl To: [email protected]
Sent by: cc:
lartc-bounces@mail Subject: LARTC Digest, Vol 20, Issue 13
man.ds9a.nl

12/10/2006 12:00
Please respond to
lartc

Send LARTC mailing list submissions to
[email protected]

To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
or, via email, send a message with subject or body 'help' to
[email protected]

You can reach the person managing the list at
[email protected]

When replying, please edit your Subject line so it is more specific than "Re: Contents of LARTC digest..."

Today's Topics:

1. Drop packets using tc ? (Ming-Ching Tiew)

----------------------------------------------------------------------

Message: 1
Date: Thu, 12 Oct 2006 10:52:28 +0800
From: "Ming-Ching Tiew" <[email protected]>
Subject: [LARTC] Drop packets using tc ?
To: <[email protected]>
Message-ID: <00ad01c6eda9$74606c50$0100a8c0@newlife>
Content-Type: text/plain; charset="iso-8859-1"

I have a linux bridge in an embedded system with limited tools.

I want to drop these packets from flowing across the bridge,

NETBEUI - TCP port 135-139
UDP port 137-139
TCP/UDP port 445

Also all broadcast and multicast.

Is there a way to accomplish it using 'tc' ? If the packets cannot be dropped, I will be happy enough if it can be classified and put to some lowest priority.

[ I don't have ebtables. 'iptables' is there but since it's a bridge,
it's probably useless. I do have 'tc'. ]

Regards.

------------------------------

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

End of LARTC Digest, Vol 20, Issue 13
*************************************

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

#5 lore raw
In reply to Ravikanth Samprathi

Pagarbiai
Darius Evseicikas
==================
UAB "PROGMERA"
Maironio g. 3, LT-60149, Raseiniai
tel./faks. +370 428 70329
mob. +370 699 97390
ICQ 297832308

Informacija šiame pranešime gali būti konfidenciali. Ji skirta tik asmeniui, kuriam yra adresuota. Jei Jūs nesate tas asmuo (arba atsakingas už šio pranešimo pristatymą tam asmeniui), Jūs negalite skaityti, kopijuoti ar bet kaip platinti šio pranešimo viso ar iš dalies ir skleisti jame esančios informacijos. Jei šį pranešimą gavote per klaidą, prašome informuoti apie tai siuntėją ir iškart ištrinti visas šio pranešimo kopijas iš Jūsų sistemos.

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc