CBQ seems not to be working...
Hello,
Could someone help me on this? I have the following configuration on
on gateway:
900Kbit/s for fw mark 2 (all traffic, except...) bounded 1100Kbit/s for fw mark 1 (mail and dns) bounded
But I can see the I have almost no traffic on fw mark 2, even though
the traffic on the output wan link is getting almost to 2Mbit/s.
This is the configuration:
/usr/local/sbin/tc qdisc add dev eth0 root handle 10: cbq bandwidth 2Mbit avpkt 1000/usr/local/sbin/tc class add dev eth0 parent 10:0 classid 10:1 cbq bandwidth 2Mbit rate 2Mbit allot 1518 weight 50Kbit prio 8 maxburst 20 avpkt 1000/usr/local/sbin/tc class add dev eth0 parent 10:1 classid 10:100 cbq bandwidth 2Mbit rate 1100Kbit allot 1518 weight 50Kbit prio 5 maxburst 20 avpkt 1000 bounded/usr/local/sbin/tc class add dev eth0 parent 10:1 classid 10:10 cbq bandwidth 2Mbit rate 900Kbit allot 1518 weight 50Kbit prio 5 maxburst 20 avpkt 1000 bounded/usr/local/sbin/tc filter add dev eth0 protocol ip parent 10:0 prio 100 handle 1 fw flowid 10:100/usr/local/sbin/tc filter add dev eth0 protocol ip parent 10:0 prio 10 handle 2 fw flowid 10:10
Am I missing something here?
I would appreciate any help. Thanks!
Forster
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
José Carlos Ramírez Pérez
You're missing queue disciplines for leaf classes. You should add:
tc qdisc add dev eth0 parent 10:100 tbf rate 1100Kbit \
buffer 10Kb/8 limit 15Kb
tc qdisc add dev eth0 parent 10:10 tbf rate 900Kbit \
buffer 10Kb/8 limit 15Kb
And you should set weight values to rate/10 approx. on all classes.
Maybe you should try cbq.init script from Pavel Golubev (you'll find the ftp site address in the HOWTO).
Signature · 9 lines
José Carlos Ramírez Pérez
Área de Internet y Telecomunicaciones
mailto:[email protected]
___________________________________________________
ISOTROL S.A.
Avda. de la innovación nº 1, 3ª plta, 41020 Sevilla
Tel.: 955 036 800 - Fax: 955 036 849
web: http://www.isotrol.com/Quoted 32 lines · Antonio Paulo Salgado Forster
Hello,
Could someone help me on this? I have the following configuration on
on gateway:900Kbit/s for fw mark 2 (all traffic, except...) bounded 1100Kbit/s for fw mark 1 (mail and dns) bounded
But I can see the I have almost no traffic on fw mark 2, even though
the traffic on the output wan link is getting almost to 2Mbit/s.This is the configuration:
/usr/local/sbin/tcqdisc add dev eth0 root handle 10: cbq bandwidth 2Mbit avpkt 1000/usr/local/sbin/tcclass add dev eth0 parent 10:0 classid 10:1 cbq bandwidth 2Mbit rate 2Mbit allot 1518 weight 50Kbit prio 8 maxburst 20 avpkt 1000/usr/local/sbin/tcclass add dev eth0 parent 10:1 classid 10:100 cbq bandwidth 2Mbit rate 1100Kbit allot 1518 weight 50Kbit prio 5 maxburst 20 avpkt 1000 bounded/usr/local/sbin/tcclass add dev eth0 parent 10:1 classid 10:10 cbq bandwidth 2Mbit rate 900Kbit allot 1518 weight 50Kbit prio 5 maxburst 20 avpkt 1000 bounded/usr/local/sbin/tcfilter add dev eth0 protocol ip parent 10:0 prio 100 handle 1 fw flowid 10:100/usr/local/sbin/tcfilter add dev eth0 protocol ip parent 10:0 prio 10 handle 2 fw flowid 10:10Am I missing something here?
Quoted 7 lines
I would appreciate any help. Thanks!
Forster
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/