Skip to contentSkip to conversation

Messed something up with cbq

LARTC Sebastian 'spax' Pape 1 participant 1 message Apr 16, 2001

lore
Share & tools
lore
#0 lore raw

hi there,

I tried to setup traffic control in analogy to the howto - but for some reason it seams not to work. I looked around in the mailing-list-archive but didn't get a clue what I messed up. So this is what I want to do:

I. Marking the paketes with iptables
I think this works, because if I list the mangle rules the counter is increased.

II. Controlling the traffic
Probably I messed up something here - perhaps someone can show me the point?

The problem seems that no traffic is going to the right queues. This is what tc -s qdisc shows:

| qdisc sfq 8014: dev eth0 quantum 1514b perturb 15sec | Sent 0 bytes 0 pkts (dropped 0, overlimits 0) [...]

| qdisc prio 8012: dev eth0 bands 3 priomap  1 2 2 2 1 2 0 0 1 1 1 1 1
| 1 1 1
| Sent 0 bytes 0 pkts (dropped 0, overlimits 0) 
[...]
| qdisc cbq 2: dev eth0 rate 128Kbit (bounded,isolated) prio
| no-transmit
| Sent 879303 bytes 6518 pkts (dropped 0, overlimits 0) 
| borrowed 0 overactions 0 avgidle 49999 undertime 0

As you can see the byte-counter does not increase except for the main queue.

This is my configuration:

# first create 'queuing discipline', root class and 5 subclasses

# $TC qdisc add dev eth0 root handle 2: cbq bandwidth 128Kbit avpkt \
1000 mpu 64
# $TC class add dev eth0 parent 2:0 classid 2:1 cbq bandwidth \
128Kbit rate 128Kbit allot 1492 weight 12Kbit prio 8 maxburst 20 \
avpkt 1000
# $TC class add dev eth0 parent 2:1 classid 2:100 cbq bandwidth \
128Kbit rate 32Kbit allot 1492 weight 3Kbit prio 4 maxburst 20 \
avpkt 1000
# $TC class add dev eth0 parent 2:1 classid 2:200 cbq bandwidth \
128Kbit rate 28Kbit allot 1492 weight 3Kbit prio 1 maxburst 20 \
avpkt 1000
# $TC class add dev eth0 parent 2:1 classid 2:300 cbq bandwidth \
128Kbit rate 28Kbit allot 1492 weight 3Kbit prio 1 maxburst 20 \
avpkt 1000
# $TC class add dev eth0 parent 2:1 classid 2:400 cbq bandwidth \
128Kbit rate 20Kbit allot 1492 weight 2Kbit prio 5 maxburst 20 \
avpkt 1000
# $TC class add dev eth0 parent 2:1 classid 2:500 cbq bandwidth \
128Kbit rate 20Kbit allot 1492 weight 1Kbit prio 5 maxburst 20 \
avpkt 1000

# now create leaf classes

# $TC qdisc add dev eth0 parent 2:100 prio
# $TC qdisc add dev eth0 parent 2:200 prio
# $TC qdisc add dev eth0 parent 2:300 prio
# $TC qdisc add dev eth0 parent 2:400 sfq quantum 1514b perturb 15 # $TC qdisc add dev eth0 parent 2:500 sfq quantum 1514b perturb 15

# and filter traffic to the right queues

# $TC filter add dev eth0 parent 2:0 protocol ip prio 100 handle \
11 fw classid 2:100
# $TC filter add dev eth0 parent 2:0 protocol ip prio 100 handle \
21 fw classid 2:200
# $TC filter add dev eth0 parent 2:0 protocol ip prio 100 handle \
31 fw classid 2:300
# $TC filter add dev eth0 parent 2:0 protocol ip prio 100 handle \
41 fw classid 2:400
# $TC filter add dev eth0 parent 2:0 protocol ip prio 100 handle \
51 fw classid 2:500

This should be very similar to the how-to but it doesn't work - any ideas?

thanks a lot in advance
Sebastian

Signature · 9 lines
Sebastian 'spax' Pape           | There are three types of people in the world;
fax2mail: +49-89-2443-14398     | those who can count, and those who can't.   
mailto  : [email protected]  | 
         --- Do you want to know more? http://www.p-a-p-e.de/ ---


_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/