Port based bandwidth limiting.
Okay I am new at this stuff so don't burn me to bad. Anyway.
I have a T1 and the bandwidth is being wasted on a massive amount of Audio streams.
So the question is. What should I be looking at to limit all Audio streams on port 1755 to say 56kbits of my full T1?
Thanks for any info
Nick
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Okay I haven't looked through the archives yet so if the answer is there I apologize for the repeat post.
Nick
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
hi Nick!
Quoted 2 lines
So the question is. What should I be looking at to limit all Audio streams on port 1755 to say 56kbits of my full T1?
Just mark the pakets with netfilter and limit your traffic based on the firewall-marks. You shouldn't need much more to read than the howtos for netfilter and advanced routing.
best regards
Sebastian
Signature · 10 lines
Sebastian 'spax' Pape | God is real, unless declared as an integer. fax2mail: +49-89-2443-14398 | mailto : [email protected] | --- Do you want to know more? http://www.p-a-p-e.de/ --- _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/