Prioritzing SYNs and SYN-ACKs with Diffserv
Hi,
I'm interested in prioritizing all packets with the SYN bit on, both with and without the ACK bit on (but specially the SYN ACKS).
I am checking is the use of Diffserv. From a paper I read I understood that when Diffserv is on, all "Control Traffic", including TCP SYN-ACKs, gets by default into "band 0" of Diffserv, the highest priority out of 16 bands. If true, this can suit my needs.
The paper name is "Implementation of SRPT Scheduling in Web Servers", and they used kernel version 2.2.14 with a Diffserv patch. I am using kernel version 2.4.3, which I built with all "QoS and Fair Queueing" options on.
My question is, what should I do now to make the prioritizing behaviour described above work ? any tc command ?
Any comments are welcome.
Best Regards,
Oded
Oded Shaham
Flash Networks
16 Galgalei Haplada, Herzliya, Israel
Tel: +972-9-9580666 ext. 215
Fax: +972-9-9564888
Cell phone: +972-5-4552009
Email: [email protected]
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/