almost got routing working, but as I sad "Almost", i need some help
Hi
Here is the architecture:
I have 2 Internet connections
router 1 -- eth0 | | eth1
| Linux | | Router | router 2 -- eth2 | | eth3 --- PC (66.60.1.3)
Internet Connection:
router 1 = 200.63.1.1 eth0 = 200.63.1.2 router 2 = 66.60.1.1 eth2 = 66.60.1.2
Lan Connection
eth1 (NAT) = 192.168.200.0/24 192.168.201.0/24 192.168.202.0/24 eth3 (IP Aliasing) = 200.63.1.3, 200.63.1.4, 200.63.1.5 66.60.1.3, 66.60.1.4, 66.60.1.5
$ip rule
0: from all lookup local 32762: from 66.60.1.3 lookup 101 32763: from all to 66.60.1.3 lookup 100 32764: from 192.168.200.0/24 lookup 200 32765: from 192.168.100.0/24 lookup 300 32766: from all lookup main 32767: from all lookup 253
$ ip route 255.255.255.255 dev eth1 scope link (for DHCP) 200.63.1.0/24 dev eth0 proto kernel scope link src 200.63.1.2 192.168.200.0/24 dev eth1 proto kernel scope link src 192.168.200.254 192.168.201.0/24 dev eth1 proto kernel scope link src 192.168.201.254 192.168.202.0/24 dev eth1 proto kernel scope link src 192.168.202.254 66.60.1.0/24 dev eth2 proto kernel scope link src 66.60.1.2 127.0.0.0/8 dev lo scope link default via 66.60.1.1 dev eth2 (66.60.1.1 = router 2)
$ ip route list table 300 192.168.200.0/24 via 192.168.200.254 dev eth1 192.168.201.0/24 via 192.168.201.254 dev eth1 192.168.202.0/24 via 192.168.202.254 dev eth1 default via 200.63.1.1 dev eth0 (200.63.1.1 = router
$ ip route list table 200 192.168.200.0/24 via 192.168.200.254 dev eth1 192.168.202.0/24 via 192.168.202.254 dev eth1 default via 66.60.1.1 dev eth2
$ ip route list table 100 66.60.1.3 via 66.60.1.2 dev eth3
So far so good, but when I want to access the Internet with 66.60.1.3 (on
eth3) I can't.
But what I can do is ping any other machine on (192.168.200.0/24, 192.168.201.0/24, 192.168.202.0/24) from 66.60.1.3.
So I did a rule from 66.60.1.3 like this and didn't work
# ip route list table 101 200.63.1.1 via 200.63.1.2 dev eth0 66.60.1.1 via 66.60.1.2 dev eth2 default via 66.60.33.1 dev eth2
If you need any additional informational please tell me and I will send them
OK so I almost got it but need to solve this problem any ideas? or is there another way of doing this?
Thanks Krepper Guillermo
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/