Limiting Bandwidth - Very Important Question to Me
The setup :
Internet eth0 |---------| eth1 /--- 10.10.10.0/28 (intranet -
PRIVATE addresses)
--------------------| LINUX |-----<HUB>
|---------| eth1:0 \--- 63.121.156.184/29 (intranet - Voice
Service - PUBLIC (Virtual Interface) addresses)
I need configure the next for incoming and outgoing traffic:
ip 63.121.156.186 ==> a maximum of 16Kbit per second
ip 63.121.156.187 ==> a maximum of 16Kbit per second
The rest of 63.121.156.184/28 ips and 10.10.10.0/28 use a maximum of 32Kbit per second
Can somebody confirm to me if the next configuration is OK please?
#eth1
tc qdisc add dev eth1 root handle 10: cbq bandwidth 100Mbit avpkt 1000
tc class add dev eth1 parent 10:0 classid 10:1 cbq bandwidth 100Mbit rate 100Mbit allot 1514 weight 10Mbit prio 8 maxburst 20 avpkt 1000
tc class add dev eth1 parent 10:1 classid 10:100 cbq bandwidth 100Mbit rate 16Kbit allot 1514 weight 1Kbit prio 5 maxburst 20 avpkt 1000 isolated bounded
tc class add dev eth1 parent 10:1 classid 10:200 cbq bandwidth 100Mbit rate 16Kbit allot 1514 weight 1Kbit prio 5 maxburst 20 avpkt 1000 isolated bounded
tc class add dev eth1 parent 10:1 classid 10:300 cbq bandwidth 100Mbit rate 32Kbit allot 1514 weight 3Kbit prio 5 maxburst 20 avpkt 1000 isolated bounded
tc qdisc add dev eth1 parent 10:100 tbf rate 16kbit buffer 20Kb/8 limit 15Kb
tc qdisc add dev eth1 parent 10:200 tbf rate 16kbit buffer 20Kb/8 limit 15Kb
tc qdisc add dev eth1 parent 10:300 tbf rate 32kbit buffer 20Kb/8 limit 15Kb
tc filter add dev eth1 parent 10:0 protocol ip prio 100 u32 match ip dst 63.121.156.186 flowid 10:100
tc filter add dev eth1 parent 10:0 protocol ip prio 100 u32 match ip dst 63.121.156.187 flowid 10:200
tc filter add dev eth1 parent 10:0 protocol ip prio 25 u32 match ip dst 10.10.10.0/28 flowid 10:300
tc filter add dev eth1 parent 10:0 protocol ip prio 25 u32 match ip dst 63.121.156.184/30 flowid 10:300
#eth0
tc qdisc add dev eth0 root handle 20: cbq bandwidth 100Mbit avpkt 1000
tc class add dev eth0 parent 20:0 classid 20:1 cbq bandwidth 100Mbit rate 100Mbit allot 1514 weight 10Mbit prio 8 maxburst 20 avpkt 1000
tc class add dev eth0 parent 20:1 classid 20:100 cbq bandwidth 100Mbit rate 16Kbit allot 1514 weight 1Kbit prio 5 maxburst 20 avpkt 1000 isolated bounded
tc class add dev eth0 parent 20:1 classid 20:200 cbq bandwidth 100Mbit rate 16Kbit allot 1514 weight 1Kbit prio 5 maxburst 20 avpkt 1000 isolated bounded
tc class add dev eth0 parent 20:1 classid 20:300 cbq bandwidth 100Mbit rate 32Kbit allot 1514 weight 3Kbit prio 5 maxburst 20 avpkt 1000 isolated bounded
tc qdisc add dev eth0 parent 20:100 tbf rate 16kbit buffer 20Kb/8 limit 15Kb
tc qdisc add dev eth0 parent 20:200 tbf rate 16kbit buffer 20Kb/8 limit 15Kb
tc qdisc add dev eth0 parent 20:300 tbf rate 32kbit buffer 20Kb/8 limit 15Kb
tc filter add dev eth0 parent 20:0 protocol ip prio 100 u32 match ip src 63.121.156.186 flowid 10:100
tc filter add dev eth0 parent 20:0 protocol ip prio 100 u32 match ip src 63.121.156.187 flowid 10:200
tc filter add dev eth0 parent 20:0 protocol ip prio 25 u32 match ip src 10.10.10.0/28 flowid 10:300
tc filter add dev eth0 parent 20:0 protocol ip prio 25 u32 match ip src 63.121.156.184/30 flowid 10:300
Thanks
Alexandra
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 3 lines
Quoted 2 lines
Quoted 2 lines
Hi
The setup :
Internet eth0 |---------| eth1 /--- 10.10.10.0/28
(intranet-PRIVATE addresses)
--------------------| LINUX |-----<HUB>
|---------| eth1:0 \--- 63.121.156.184/29(intranet-PUBLIC ADDRESSES)
(Virtual Interface)
Quoted 76 lines
Quoted 76 lines
Quoted 76 lines
I need configure the next for incoming and outgoing traffic:
ip 63.121.156.186 ==> a maximum of 16Kbit per second ip 63.121.156.187 ==> a maximum of 16Kbit per secondThe rest of 63.121.156.184/28 ips and 10.10.10.0/28 use a maximum of 32Kbit per second
Can somebody confirm to me if the next configuration is OK please?
#eth1
tc qdisc add dev eth1 root handle 10: cbq bandwidth 100Mbit avpkt 1000
tc class add dev eth1 parent 10:0 classid 10:1 cbq bandwidth 100Mbit rate 100Mbit allot 1514 weight 10Mbit prio 8 maxburst 20 avpkt 1000
tc class add dev eth1 parent 10:1 classid 10:100 cbq bandwidth 100Mbit rate 16Kbit allot 1514 weight 1Kbit prio 5 maxburst 20 avpkt 1000 isolated bounded
tc class add dev eth1 parent 10:1 classid 10:200 cbq bandwidth 100Mbit rate 16Kbit allot 1514 weight 1Kbit prio 5 maxburst 20 avpkt 1000 isolated bounded
tc class add dev eth1 parent 10:1 classid 10:300 cbq bandwidth 100Mbit rate 32Kbit allot 1514 weight 3Kbit prio 5 maxburst 20 avpkt 1000 isolated boundedtc qdisc add dev eth1 parent 10:100 tbf rate 16kbit buffer 20Kb/8 limit 15Kb
tc qdisc add dev eth1 parent 10:200 tbf rate 16kbit buffer 20Kb/8 limit 15Kb
tc qdisc add dev eth1 parent 10:300 tbf rate 32kbit buffer 20Kb/8 limit 15Kbtc filter add dev eth1 parent 10:0 protocol ip prio 100 u32 match ip dst 63.121.156.186 flowid 10:100
tc filter add dev eth1 parent 10:0 protocol ip prio 100 u32 match ip dst 63.121.156.187 flowid 10:200
tc filter add dev eth1 parent 10:0 protocol ip prio 25 u32 match ip dst 10.10.10.0/28 flowid 10:300
tc filter add dev eth1 parent 10:0 protocol ip prio 25 u32 match ip dst 63.121.156.184/30 flowid 10:300#eth0
tc qdisc add dev eth0 root handle 20: cbq bandwidth 100Mbit avpkt 1000
tc class add dev eth0 parent 20:0 classid 20:1 cbq bandwidth 100Mbit rate 100Mbit allot 1514 weight 10Mbit prio 8 maxburst 20 avpkt 1000
tc class add dev eth0 parent 20:1 classid 20:100 cbq bandwidth 100Mbit rate 16Kbit allot 1514 weight 1Kbit prio 5 maxburst 20 avpkt 1000 isolated bounded
tc class add dev eth0 parent 20:1 classid 20:200 cbq bandwidth 100Mbit rate 16Kbit allot 1514 weight 1Kbit prio 5 maxburst 20 avpkt 1000 isolated bounded
tc class add dev eth0 parent 20:1 classid 20:300 cbq bandwidth 100Mbit rate 32Kbit allot 1514 weight 3Kbit prio 5 maxburst 20 avpkt 1000 isolated boundedtc qdisc add dev eth0 parent 20:100 tbf rate 16kbit buffer 20Kb/8 limit 15Kb
tc qdisc add dev eth0 parent 20:200 tbf rate 16kbit buffer 20Kb/8 limit 15Kb
tc qdisc add dev eth0 parent 20:300 tbf rate 32kbit buffer 20Kb/8 limit 15Kbtc filter add dev eth0 parent 20:0 protocol ip prio 100 u32 match ip src 63.121.156.186 flowid 10:100
tc filter add dev eth0 parent 20:0 protocol ip prio 100 u32 match ip src 63.121.156.187 flowid 10:200
tc filter add dev eth0 parent 20:0 protocol ip prio 25 u32 match ip src 10.10.10.0/28 flowid 10:300
tc filter add dev eth0 parent 20:0 protocol ip prio 25 u32 match ip src 63.121.156.184/30 flowid 10:300
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Thanks
Alexandra
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/