Skip to contentSkip to conversation

CBQ : Bug ? (Stef Coene)

LARTC Daniel Lee 1 participant 1 message Apr 27, 2001

lore
Share & tools
lore

Daniel Lee

author
#0 lore raw

-----Original Message-----
From: [email protected]
[mailto:[email protected]]
Sent: Tuesday, April 24, 2001 6:01 PM
To: [email protected]
Subject: LARTC digest, Vol 1 #175 - 4 msgs

Send LARTC mailing list submissions to
[email protected]

To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.ds9a.nl/mailman/listinfo/lartc
or, via email, send a message with subject or body 'help' to
[email protected]

You can reach the person managing the list at
[email protected]

When replying, please edit your Subject line so it is more specific than "Re: Contents of LARTC digest..."
Hi Stef,

I also found there is some accuracy issue in CBQ.
The performance on my machine, the output BW will be cut off at around 20 Mbps even if the class bounded limit is larger.
However, as the "bounded" is taken away for the class, the output BW can be up to PHY limit--100Mbps. In other words, in my system, "bounded" can work only if the limit is below 20 Mbps.
Besides, "isolated" doesn't seem to work as its original design.

About your testing results, I am a little confused in the unit you use (bit or Byte). And if you try shorter packet length, the accuracy will be improved.

B.R.
Daniel Lee
[email protected]

Message: 1
Date: Mon, 23 Apr 2001 13:00:05 +0200
From: Stef Coene <[email protected]>
Organization: None
To: LARTC Mailing list <[email protected]>
Subject: [LARTC] CBQ : Bug ?

Hi there,

I have done a lot of testing and I have a few questions about CBQ. You
can split the traffic in diffent classes and it works great. But to do this, I have to add as the first class a bounded class with rate available link-bandwidth. I have tried different rates but CBQ isn't very accurate. I added the testing results at the bottom of the posting (or go to
http://users.belgacom.net/staf/) As you can see there are some very strange results (notice the change in throughput when I changed the rate 1kbps around 71475kbps and 135556kbps).

I also noticed that the accuracy of splitting the traffic in different classes is very good unless you want to give a class < 25% of the bandwidth.

I'm wondering if someone encountered the same problem and/or if it is a problem with tc or the kernel itself.

Signature · 121 lines
Staf

More QOS info : http://users.belgacom.net/staf/


RESULTS :
RATE_TOT    RESULT
1     kbps  1.05 KB/s
2     kbps  2.10 KB/s
3     kbps  3.04 KB/s
4     kbps  4.17 KB/s
5     kbps  5.02 KB/s
10    kbps  9.91 KB/s
15    kbps  14.7 KB/s
20    kbps  18.8 KB/s
30    kbps  29.2 KB/s
40    kbps  36.5 KB/s
50    kbps  49.2 KB/s
60    kbps  49.4 KB/s
65    kbps  49.3 KB/s
67    kbps  49.3 KB/s
68    kbps  49.3 KB/s
69    kbps  49.3 KB/s
71475  bps  51.1 KB/s
71476  bps  69.7 KB/s
70    kbps  69.9 KB/s
80    kbps  69.9 KB/s
90    kbps  70.3 KB/s
100   kbps  75.4 KB/s
130   kbps  75.7 KB/s
135556 bps  78.7 KB/s
135557 bps  139  KB/s
140   kbps  140  KB/s
150   kbps  140  KB/s
200   kbps  140  KB/s
300   kbps  140  KB/s
500   kbps  140  KB/s
1000  kbps  140  KB/s
1310719bps  146  KB/s
1310720bps  940  KB/s
2000  kbps  945  KB/s


--__--__--

Message: 2
Date: Tue, 24 Apr 2001 02:14:34 -0400
From: [email protected]
To: [email protected]
Subject: [LARTC] need suggest for tc..fw

Dear all...
I got problem when define this rule
I had define class like this

#tc qdisc show dev eth0

qdisc tbf 8003: rate 128Kbit burst 10Kb lat 381.5ms 
qdisc cbq 1: rate 10Mbit (bounded,isolated) prio no-transmit

#tc class show dev eth0 
class cbq 1: root rate 10Mbit (bounded,isolated) prio no-transmit
class cbq 1:1 parent 1: rate 10Mbit prio no-transmit
class cbq 1:1234 parent 1:1 leaf 8003: rate 128Kbit (bounded,isolated) prio
5

#tc filter show dev eth0
filter parent 1: protocol ip pref 100 u32 
filter parent 1: protocol ip pref 100 u32 fh 800: ht divisor 1 
filter parent 1: protocol ip pref 100 u32 fh 800::800 order 2048 key ht 800
bkt 0 flowid 1:1234 
  match 00140000/ffff0000 at 20

This configuration my iptables,
   
Chain PREROUTING (policy ACCEPT)
target     prot opt source               destination         
MARK       tcp  --  anywhere             anywhere           state RELATED
tcp dpt:ftp MARK set 0x1 
MARK       tcp  --  anywhere             anywhere           state RELATED
tcp spt:ftp MARK set 0x1 

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination   

So, I want to limit passive ftp traffic.
1. Tag every packet that RELATED to ftp (RELATED here, I mean refer to
passive ftp).
2. Define filter 
But when I define tc with fwmark value based, I got error..

I define like this
# tc filter add dev eth0 parent 1: protocol ip pref 100 handle 1 fw  classid
1:1234 

and I got error like this  
RTNETLINK answers: Invalid argument

Why ?, any suggest ?
Thanks in Advance

Johan
     

-- 
             -'-      
             (o o)     
---------ooO--(_)--Ooo-------------------------------------------------
  (  )/  \( )( ) (  ) ( \( )      Visit us at http://www.pinguind.co.id
 __)(( () ))__(  /__\  )  (   Feel free to contact me at ICQ  #47240718       
(___/ \__/(_)(_)(_)(_)(_)\_)                 email:[email protected]          
-----------------------------------------------------------------------


--__--__--

Message: 3
Date: Mon, 23 Apr 2001 14:25:11 +0000
From: Alexandra Alvarado <[email protected]>
To: Alexandra Alvarado <[email protected]>, [email protected]
Subject: [LARTC] CBQ does not works
Quoted 126 lines · Alexandra Alvarado

Hello, I'm Alexandra

I have a Linux firewall [Red Hat 7.0] and i need to implement cbq, until now i make my file configuration that is:

=====Introduction======

[The Internet] --- [Linux router] --- [Intranet]
eth0 eth1

The Networks Cards are "rtl8139"

And what i whant is that the input and output to the intranet can reach a max bandwidth of 64 Kbit per second

=============== File cbq.init
================

#!/bin/sh

# eth1

tc qdisc add dev eth1 root handle 10: cbq bandwidth 100Mbit avpkt 1000

tc class add dev eth1 parent 10:0 classid 10:1 cbq bandwidth 100Mbit rate 100Mbit allot 1514 weight 1Mbit prio 8 maxburst 20 avpkt 1000

tc class add dev eth1 parent 10:1 classid 10:100 cbq bandwidth 100Mbit rate 64Kbit allot 1514 weight 6Kbit prio 5 maxburst 20 avpkt 1000 bounded

tc qdisc add dev eth1 parent 10:100 sfq quantum 1514b perturb 15

tc filter add dev eth1 parent 10:0 protocol ip prio 25 u32 match ip dst 10.10.10.0/24 flowid 10:100

# eth0

tc qdisc add dev eth0 root handle 20: cbq bandwidth 100Mbit avpkt 1000

tc class add dev eth0 parent 20:0 classid 20:1 cbq bandwidth 100Mbit rate 100Mbit allot 1514 weight 1Mbit prio 8 maxburst 20 avpkt 1000

tc class add dev eth0 parent 20:1 classid 20:100 cbq bandwidth 100Mbit rate 64Kbit allot 1514 weight 6Kbit prio 5 maxburst 20 avpkt 1000 bounded

tc qdisc add dev eth0 parent 20:100 sfq quantum 1514b perturb 15

tc filter add dev eth0 parent 20:0 protocol ip prio 25 u32 match ip src 10.10.10.0/24 flowid 20:100

=========== cbq.init stats ==============>
---[ eth0: configured classes ]---------------------------

class cbq 20: root rate 100Mbit (bounded,isolated) prio no-transmit
Sent 6723337 bytes 32154 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 61 undertime 0
class cbq 20:100 parent 20:1 leaf 8004: rate 64Kbit (bounded) prio 5
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 2.83654e+06 undertime 0
class cbq 20:1 parent 20: rate 100Mbit prio no-transmit
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 62 undertime 0

---[ eth0: queueing disciplines ]-------------------------

qdisc sfq 8004: quantum 1514b perturb 15sec
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)

qdisc cbq 20: rate 100Mbit (bounded,isolated) prio no-transmit Sent 6724367 bytes 32157 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 62 undertime 0

---[ eth1: configured classes ]---------------------------

class cbq 10: root rate 100Mbit (bounded,isolated) prio no-transmit
Sent 26432943 bytes 32209 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 62 undertime 0
class cbq 10:100 parent 10:1 leaf 8003: rate 64Kbit (bounded) prio 5
Sent 26410431 bytes 31673 pkts (dropped 455, overlimits 188780)
borrowed 0 overactions 20574 avgidle 375275 undertime 0
class cbq 10:1 parent 10: rate 100Mbit prio no-transmit
Sent 26410431 bytes 31673 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 62 undertime 0

---[ eth1: queueing disciplines ]-------------------------

qdisc sfq 8003: quantum 1514b perturb 15sec
Sent 27456058 bytes 33494 pkts (dropped 455, overlimits 0)

qdisc cbq 10: rate 100Mbit (bounded,isolated) prio no-transmit Sent 27482602 bytes 34126 pkts (dropped 455, overlimits 184922)
borrowed 0 overactions 0 avgidle 62 undertime 0

======= cbq.init list ==========

---[ eth0: configured classes ]---------------------------

class cbq 20: root rate 100Mbit (bounded,isolated) prio no-transmit class cbq 20:100 parent 20:1 leaf 8004: rate 64Kbit (bounded) prio 5 class cbq 20:1 parent 20: rate 100Mbit prio no-transmit

---[ eth0: queueing disciplines ]-------------------------

qdisc sfq 8004: quantum 1514b perturb 15sec
qdisc cbq 20: rate 100Mbit (bounded,isolated) prio no-transmit

---[ eth1: configured classes ]---------------------------

class cbq 10: root rate 100Mbit (bounded,isolated) prio no-transmit class cbq 10:100 parent 10:1 leaf 8003: rate 64Kbit (bounded) prio 5 class cbq 10:1 parent 10: rate 100Mbit prio no-transmit

---[ eth1: queueing disciplines ]-------------------------

qdisc sfq 8003: quantum 1514b perturb 15sec
qdisc cbq 10: rate 100Mbit (bounded,isolated) prio no-transmit

=======Problem=======>
I have an mrtg monitor, and according to this the bandwidth of the firewall exceeds the 64 Kbit per seconds, i don't know why, i need extrictly the bandwidth does no exceeds 64 Kbps.

Quoted 5 lines

==================

Thanks

Alexandra

--__--__--

Message: 4
From: Ernesto Silva <[email protected]>
Organization: Universidad ORT Uruguay
To: [email protected]
Date: Mon, 23 Apr 2001 16:31:13 -0300
Subject: [LARTC] Documentation needed.

Hi guys,
Can you send me links with documetnation about the kernel routing
tables, etc. Something else apart from the Advaced Routing HOWTO.

Thanks
Ernesto Silva
(From Uruguay, South America)

--__--__--

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc

End of LARTC Digest

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/