Skip to contentSkip to conversation

Is this a mistake (AF level)?????

LARTC Juergen 2 participants 2 messages May 9, 2001

lore
Share & tools
lore

Juergen

author
#0 lore raw

I saw the draft-almesberger-wajhak-diffserv-linux-00.txt file. But in this file say that AF21 is 0x18 and AF22 is 0x1a.

If the rfc2597 is right(list below)
The RECOMMENDED values of the AF codepoints are as follows: AF11 = '
001010', AF12 = '001100', AF13 = '001110', AF21 = '010010', AF22 = ' 010100', AF23 = '010110', AF31 = '011010', AF32 = '011100', AF33 = ' 011110', AF41 = '100010', AF42 = '100100', and AF43 = '100110'.

AF21 and AF22 is 010010 and 010100
010010 = 0x12
010100 = 0x14
is that right??????
Why many papers and documents arent' use this table?????

#1 lore raw

Hello Juergen,

Quoted 2 lines

I saw the draft-almesberger-wajhak-diffserv-linux-00.txt file. But in this file say that AF21 is 0x18

and two paragraphs before that they state that AF21 is 0x12 - so maybe its a typing error. Or the AF-DSCP values were not defined clearly at that time - both, rfc2597 and the draft were written in june99. Or its pure stubbornness - imagine Werner realy _wanted_ his AF22 to be 0x1a. The values in rfc2597 are RECOMMENDED values after all. ;)

Quoted 10 lines

If the rfc2597 is right(list below)
The RECOMMENDED values of the AF codepoints are as follows: AF11 = '
001010', AF12 = '001100', AF13 = '001110', AF21 = '010010', AF22 = ' 010100', AF23 = '010110', AF31 = '011010', AF32 = '011100', AF33 = ' 011110', AF41 = '100010', AF42 = '100100', and AF43 = '100110'.

AF21 and AF22 is 010010 and 010100
010010 = 0x12
010100 = 0x14
is that right??????

Yes.

Quoted 1 line

Why many papers and documents arent' use this table?????

Stubbornness, ignorance, inertia, eccentricsm, typos... hmm, probably mostly ignorance - that's my guess.

Kurt

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/