"isolated" doesn't work?
Hi all cbq guru,
In my network BW measurement, it seems that the class type "isolated" doesn't work.
Supposedly, "isolated" class means it neither share other's BW nor share its BW to other. The simple network is as follows:
root (1:0)
|
parent (1:1) --BW 10Mbit
/\
/ \
/ \
child1 (1:2) child2 (1:3)
BW 5Mbit BW 5 Mbit
isolated isolatedBut according to measurement, child2 class can still get 10 Mbit if child1 class is idle.
Do I misunderstand the meaning of "isolated" or does it don't work. Does any guru find the same problem? Please give me some comment if you know the answer.
Daniel Lee
e-mail:[email protected]
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
"isolated" means other classes cannot borrow bandwidth from you, "bounded" means you cannot borrow bw from other classes.
Quoted 23 lines · Daniel Lee
Hi all cbq guru,
In my network BW measurement, it seems that the class type "isolated" doesn't work.
Supposedly, "isolated" class means it neither share other's BW nor share its BW to other. The simple network is as follows:root (1:0) | parent (1:1) --BW 10Mbit /\ / \ / \ child1 (1:2) child2 (1:3) BW 5Mbit BW 5 Mbit isolated isolatedBut according to measurement, child2 class can still get 10 Mbit if child1 class is idle.
Do I misunderstand the meaning of "isolated" or does it don't work. Does any guru find the same problem? Please give me some comment if you know the answer.
Quoted 9 lines
Daniel Lee
e-mail:[email protected]_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
-----Original Message-----
From: Guy Van Den Bergh [mailto:[email protected]]
Sent: Tuesday, May 15, 2001 4:32 AM
To: Daniel Lee
Cc: [email protected]
Subject: Re: [LARTC] "isolated" doesn't work?
Quoted 2 lines
"isolated" means other classes cannot borrow bandwidth from you, "bounded" means you cannot borrow bw from other classes.
Thanks for your answer. However, from the results, child2 class can borrow bw from child1 class.
Have you the same results?
Quoted 5 lines · Daniel Lee
Hi all cbq guru,
In my network BW measurement, it seems that the class type "isolated" doesn't work.
Supposedly, "isolated" class means it neither share other's BW nor share
its
Quoted 18 lines
BW to other. The simple network is as follows:
root (1:0) | parent (1:1) --BW 10Mbit /\ / \ / \ child1 (1:2) child2 (1:3) BW 5Mbit BW 5 Mbit isolated isolatedBut according to measurement, child2 class can still get 10 Mbit if child1 class is idle.
Do I misunderstand the meaning of "isolated" or does it don't work. Does any guru find the same problem? Please give me some comment if you know the answer.
Quoted 6 lines
Daniel Lee
e-mail:[email protected]_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:
Quoted 3 lines
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/