iproute newbie
Quoted 34 lines · Michal Kolesar
Hi all,
I tried to set up a traffic shaper for our Inetnet connection.
In our company we have 256Kbps line to Internet.
195.39.72.238 eth0 ---- FW ---- eth1 192.168.0.1
And I would like to set up my firewall to split our connection to two 128Kbps..
our internal network IP address is 192.168.0.0/24
My idea is:
one computer with address 192.168.0.7 to have 128Kbps part of our 256Kbps line and all others computer in our 192.168.0.0/24 internal network shared the second 128Kbps part of our 256Kbps..
How can I do is?
I tried something like this:
[root@gateway /root]# tc qdisc ls dev eth0
qdisc sfq 8002: quantum 1514b perturb 15sec
qdisc sfq 8001: quantum 1514b perturb 15sec
qdisc cbq 10: rate 256Kbit (bounded,isolated) prio no-transmit [root@gateway /root]# tc class ls dev eth0
class cbq 10: root rate 256Kbit (bounded,isolated) prio no-transmit class cbq 10:100 parent 10:1 leaf 8001: rate 128Kbit (bounded) prio 5 class cbq 10:1 parent 10: rate 256Kbit prio no-transmit class cbq 10:200 parent 10:1 leaf 8002: rate 128Kbit (bounded) prio 5 [root@gateway /root]#
Quoted 2 lines
is it correct?
To the best of my knowledge, it should work. Maybe you will find
useful removing the `bounded' option, in order to allow everyone using the maximum bandwidth whenever it is possible.
Moreover, for traffic shaping you may find useful the
tbf (Tocken Bucket Filter) discipline instead of sfq.
Quoted 3 lines
and the next question..
how could i remove all the qdiscs and classes from firewall? something like ipchains -F -X... delete all 'tc' settings..
Try something like 'tc qdisc del dev eth0 del root', the root
qdisc, class and all the children nodes should vanish.
Quoted 5 lines
Thank you for help.
kolisko
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/