priority of class
I installed configuration:
qdisc cbq
class
qdisc cbq
and split traffic in 2 more classes
tc class add dev eth0 parent 2:0 classid 2:21 cbq avpkt 1000 bandwidth 100Mbit \
rate 70Mbit prio 3 maxburst 20
tc qdisc add dev eth0 parent 2:21 tbf rate 70Mbit buffer 45Kb/8 limit 15Kb
tc class add dev eth0 parent 2:0 classid 2:22 cbq avpkt 1000 bandwidth 100Mbit \
rate 70Mbit prio 4 maxburst 20
tc qdisc add dev eth0 parent 2:22 tbf rate 70Mbit buffer 45Kb/8 limit 15Kb
Actualy results is Ok.I am trying to see influence of "prio" parameter of class
and nothing happened.
Please, help me w/ your answer.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
I understand that "prio" optiion in tc class is useless when you add cbq cause here you specifying to which kind of QDISC your class connected, so can be CBQ, PRIO and etc. kinds.
Anybody agree w/ me?
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 4 lines · Gery Kahn
I understand that "prio" optiion in tc class is useless when you add cbq cause here you specifying to which kind of QDISC your class connected, so can be CBQ, PRIO and etc. kinds.
I don't understand your three-line-long sentence.
Please clarify what the exact problem is and give an example where the prio parameter would not have any effect. Don't add prio's before knowing what you want.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/