Skip to contentSkip to conversation

LARTC digest, Vol 1 #222 - 12 msgs

LARTC Daniel Lee 2 participants 2 messages Jun 7, 2001

lore
Share & tools
lore

Daniel Lee

author
#0 lore raw

Message: 12
From: Gery Kahn <[email protected]>
To: "'[email protected]'" <[email protected]>
Date: Tue, 5 Jun 2001 20:28:30 +0200
Subject: [LARTC] priority of class

->split traffic in 2 more classes
->tc class add dev eth0 parent 2:0 classid 2:21 cbq avpkt 1000 bandwidth ->100Mbit \
->rate 70Mbit prio 3 maxburst 20

->tc qdisc add dev eth0 parent 2:21 tbf rate 70Mbit buffer 45Kb/8 limit 15Kb

->tc class add dev eth0 parent 2:0 classid 2:22 cbq avpkt 1000 bandwidth ->100Mbit \
->rate 70Mbit prio 4 maxburst 20

->tc qdisc add dev eth0 parent 2:22 tbf rate 70Mbit buffer 45Kb/8 limit 15Kb

->Actualy results is Ok.I am trying to see influence of "prio" parameter of ->class
->and nothing happened.
->Please, help me w/ your answer.

You get the same conclusion as mine. I can't see the effect of class prio.

Daniel Lee

--__--__--

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc

End of LARTC Digest

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

#1 lore raw
Quoted 18 lines · Daniel Lee

Message: 12
From: Gery Kahn <[email protected]>
To: "'[email protected]'" <[email protected]>
Date: Tue, 5 Jun 2001 20:28:30 +0200
Subject: [LARTC] priority of class

->split traffic in 2 more classes
->tc class add dev eth0 parent 2:0 classid 2:21 cbq avpkt 1000 bandwidth ->100Mbit \
->rate 70Mbit prio 3 maxburst 20

->tc qdisc add dev eth0 parent 2:21 tbf rate 70Mbit buffer 45Kb/8 limit 15Kb

->tc class add dev eth0 parent 2:0 classid 2:22 cbq avpkt 1000 bandwidth ->100Mbit \
->rate 70Mbit prio 4 maxburst 20

Quoted 8 lines

->tc qdisc add dev eth0 parent 2:22 tbf rate 70Mbit buffer 45Kb/8 limit 15Kb

->Actualy results is Ok.I am trying to see influence of "prio" parameter of ->class
->and nothing happened.
->Please, help me w/ your answer.

You get the same conclusion as mine. I can't see the effect of class prio.

I don't see why the prio parameter should work in this (incomplete?) setup. I see 3 class levels. The prio parameters works if children of one class have different prio values and the sum of the rates of the children does not equal the parent rate.

Example:

class 1:1 rate 100Mbit

 |
 |-- class 1:11 rate 20Mbit prio 1
 |
 |-- class 1:12 rate 20Mbit prio 2

You will see that both child classes (1:11 and 1:12) will get a minimum of 20Mbit, but if both want more, class 1:11 will received the remaining bandwidth first. So, in a high-load situation, class 1:11 gets 20 + 60Mbit and class 1:12 will get only the minimum, 20Mbit.

Clear? ;-p

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/