How to use tc to limit bandwidth of a special IP in LAN
I have seen this document, but I don't understand means of options.
Usage: tc qdisc [ add | del | replace | change | get ] dev STRING
[ handle QHANDLE ] [ root | ingress | parent CLASSID ] [ estimator INTERVAL TIME_CONSTANT ]
[ [ QDISC_KIND ] [ help | OPTIONS ] ]
What are root,ingress and parent?
What is CLASSID?
What is handle?
..
Quoted 14 lines
http://www.ibiblio.org/pub/Linux/docs/HOWTO/Adv-Routing-HOWTO
----- Original Message -----
From: "Chuanbo Xu" <[email protected]>
To: <[email protected]>
Sent: Tuesday, June 12, 2001 1:00 AM
Subject: [LARTC] How to use tc to limit bandwidth of a special IP in LANQuoted 3 lines
hi,
I want to limit bandwidth of a special IP in LAN, when it upload or
download from Internet through Linux server. How to use tc to do?
Quoted 1 line
Quoted 8 lines
Quoted 6 lines
Thanks.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a..nl/2.4Routing/
Quoted 1 line
Chuanbo Xu
[email protected]
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Re: Re: [LARTC] How to use tc to limit bandwidth of a special IP in
Quoted 9 lines · Chuanbo Xu
I have seen this document, but I don't understand means of options.
Usage: tc qdisc [ add | del | replace | change | get ] dev STRING
[ handle QHANDLE ] [ root | ingress | parent CLASSID ] [ estimator INTERVALTIME_CONSTANT]
[ [QDISC_KIND] [ help | OPTIONS ] ]What are root,ingress and parent?
What is CLASSID?
What is handle?
You don't have to understand all details to setup a working bandwidth limiting Linux router, try the example setups and experiment. That's the only way to lear to use it.
CLASSID and handle are just identifiers to point the the right classes. Just think about them like names. Root is the root of the class tree.
RTFM means "Read The Fucking Manual". You can find it back at:
http://www.astro.umd.edu/~marshall/abbrev.html#R
There is even a Chinese version of the manual:
http://www.e-infomax.com/ipmasq/ipmasq-howto.html
Signature · 8 lines
GnuPG public key: http://win-www.uia.ac.be/u/s965817/pub.key fingerprint = A3C4 DE50 712D 4FA8 C564 4D96 5E06 C9CC ECFA 19C5 Please type your text BELOW the qoute. _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 9 lines · Chuanbo Xu
I have seen this document, but I don't understand means of options.
Usage: tc qdisc [ add | del | replace | change | get ] dev STRING
[ handle QHANDLE ] [ root | ingress | parent CLASSID ] [ estimator INTERVALTIME_CONSTANT]
[ [QDISC_KIND] [ help | OPTIONS ] ]What are root,ingress and parent?
What is CLASSID?
What is handle?
Good question. If anybody has any idea what all these keywords mean I'd really appreciate the answer.
Ramin
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 8 lines · Wingtung.Leung
Quoted 6 lines · Chuanbo Xu
I have seen this document, but I don't understand means of options.
Usage: tc qdisc [ add | del | replace | change | get ] dev STRING
[ handle QHANDLE ] [ root | ingress | parent CLASSID ] [ estimator INTERVALTIME_CONSTANT]
[ [QDISC_KIND] [ help | OPTIONS ] ]
Quoted 7 lines
Quoted 3 lines
What are root,ingress and parent?
What is CLASSID?
What is handle?You don't have to understand all details to setup a working bandwidth limiting Linux router, try the example setups and experiment. That's the only way to lear to use it.
You mean there is no-one (even not the one who wrote this QoS thing) has a decent doc on that? Trial and error is evil and waste of time.
Ramin
Quoted 9 lines
CLASSID and handle are just identifiers to point the the right classes. Just think about them like names. Root is the root of the class tree.
RTFM means "Read The Fucking Manual". You can find it back at:
http://www.astro.umd.edu/~marshall/abbrev.html#RThere is even a Chinese version of the manual:
http://www.e-infomax.com/ipmasq/ipmasq-howto.html
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Re: Re: [LARTC] How to use tc to limit bandwidth of a special IP in
In reply to Chuanbo XuQuoted 2 lines · Ramin Alidousti
You mean there is no-one (even not the one who wrote this QoS thing) has a decent doc on that? Trial and error is evil and waste of time.
First, the best way to learn things is to try it. If you think that's a waste of time, you shouldn't be using GNU/Linux in the first place, but consider a commercial boxed Cisco router or something alike.
And secondly, the best and most accurate documentation: the source code. Every detail is explained there.
No offence.
A handle is just a tool or way to hold something, in this case a pointer or reference to the previously constructed class.
(Please don't CC me, I'm already subscribed to the list.)
Signature · 8 lines
GnuPG public key: http://www.keyserver.net fingerprint = A3C4 DE50 712D 4FA8 C564 4D96 5E06 C9CC ECFA 19C5 _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 1 line · Wingtung.Leung
First, the best way to learn things is to try it. If you think that's a
I'm not opposed to trying. But just think how much time you'd waste if you had to start from nowhere with apache/sendmail/bash/netfilter and many many other applications. Of course you have the source and can figure out what they do by going through the code line by line, but that's not the point.
Why do you think that your "GNU/Linux" has "Linux Documentation Project"????
Quoted 2 lines
waste of time, you shouldn't be using GNU/Linux in the first place, but consider a commercial boxed Cisco router or something alike.
Actually, one of the reasons that I don't like the commercial products like cisco is that you get:
Command Comment
------- -------
ip cef enables cef
no ip cef disables cef
but what the heck is cef in the first place?
Most of the Linux applications have an excellent documentation. iproute2 is an exception.
Quoted 2 lines
And secondly, the best and most accurate documentation: the source code. Every detail is explained there.
I'm glad that it's not coded in machine language...
Quoted 1 line
No offence.
non taken.
Quoted 4 lines
A handle is just a tool or way to hold something, in this case a pointer or reference to the previously constructed class.
(Please don't CC me, I'm already subscribed to the list.)
I'd expected more from an academicus as yourself. They used to have many courses like "formele specificaties". Did they remove them from the programs?
Ramin
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Nothing like trial and error, but cone on, let's not have have each person individually reinvent the wheel. Many man hours are wasted trying to figure out how the most basic commands work by experimentation, when it would be so easy to just make a clear explanation of them in the documentation. Some examples of the command line would be most helpful.
While Linux, in general is not for the faint of heart, the doccumentation for this particular set of tools is overly cryptic. I, for one, am not a programmer and can't "read the source code". Not that that should be necessary for anyone not refining it anyway. With a good explanation of the cammands and variables, those man hours could be spent working on innovative ways to impliment these wonderful tools, rather than trying to figure out which end goes up.
I have spent days trying to do the most basic things with these new tools that I accomplished in hours with 2.2.x, and have made some progress but it does not have to be so difficult.
The Linux project is a wonderful thing! Millons of people from all over the world, working together and sharing their knowledge and ideas. And creating a first rate OS in the process. Linux is gaining more and more support every day. I believe that it will soon find it's place in the commonwealth that it is so deserving of, but for that to happen it's features must be accessable to users other than the Elete.
Finally, the power is in the right place. In the hands of the users. Let's try and get along. We are all on the same team.
----- Original Message -----
From: "Ramin Alidousti" <[email protected]>
To: <[email protected]>
Sent: Wednesday, June 13, 2001 4:49 PM
Subject: Re: Re: [LARTC] How to use tc to limit bandwidth of a special IP in LAN
Quoted 5 lines · Wingtung.Leung
Quoted 2 lines
First, the best way to learn things is to try it. If you think that's a
I'm not opposed to trying. But just think how much time you'd waste if you
had
Quoted 1 line
to start from nowhere with apache/sendmail/bash/netfilter and many many
other
Quoted 1 line
applications. Of course you have the source and can figure out what they
do
Quoted 3 lines
by going through the code line by line, but that's not the point.
Why do you think that your "GNU/Linux" has "Linux Documentation
Project"????
Quoted 5 lines
Quoted 3 lines
waste of time, you shouldn't be using GNU/Linux in the first place, but consider a commercial boxed Cisco router or something alike.
Actually, one of the reasons that I don't like the commercial products
like
Quoted 10 lines
cisco is that you get:
Command Comment
------- -------
ip cef enables cef
no ip cef disables cefbut what the heck is cef in the first place?
Most of the Linux applications have an excellent documentation. iproute2
is
Quoted 11 lines
an exception.
Quoted 2 lines
And secondly, the best and most accurate documentation: the source code. Every detail is explained there.
I'm glad that it's not coded in machine language...
Quoted 1 line
No offence.
non taken.
Quoted 7 lines
Quoted 4 lines
A handle is just a tool or way to hold something, in this case a pointer or reference to the previously constructed class.
(Please don't CC me, I'm already subscribed to the list.)
I'd expected more from an academicus as yourself. They used to have many courses like "formele specificaties". Did they remove them from the
programs?
Quoted 6 lines
Ramin
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:
Quoted 1 line
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Re: Re: [LARTC] How to use tc to limit bandwidth of a special IP in
In reply to Chuanbo XuQuoted 8 lines · streeterk
Nothing like trial and error, but cone on, let's not have have each person individually reinvent the wheel. Many man hours are wasted trying to figure out how the most basic commands work by experimentation, when it would be so easy to just make a clear explanation of them in the documentation. Some examples of the command line would be most helpful.
While Linux, in general is not for the faint of heart, the doccumentation for this particular set of tools is overly cryptic.
Maybe I'm using a different iproute2 package than you, but my iproute2 came with a massive 60 page manual: ip-cref.dvi. It really is way more documentation than you get with most tools.
I've often cursed iproute2 for its command syntax, but the root problem always turns out to be my own ignorance of routing and internetworking.
-jwb
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 11 lines · Jeffrey W. Baker
Quoted 8 lines · streeterk
Nothing like trial and error, but cone on, let's not have have each person individually reinvent the wheel. Many man hours are wasted trying to figure out how the most basic commands work by experimentation, when it would be so easy to just make a clear explanation of them in the documentation. Some examples of the command line would be most helpful.
While Linux, in general is not for the faint of heart, the doccumentation for this particular set of tools is overly cryptic.
Quoted 6 lines
Maybe I'm using a different iproute2 package than you, but my iproute2 came with a massive 60 page manual: ip-cref.dvi. It really is way more documentation than you get with most tools.
I've often cursed iproute2 for its command syntax, but the root problem always turns out to be my own ignorance of routing and internetworking.
Yes. I have these .tex files as well. Much beter than scanning through the source code...
"ip" is kind of easy to follow (maybe because I already know what I'm looking for) but when it comes down to "tc", my head spins. Take the following (easy) example:
tc class add dev eth1 parent 1:1 classid 1:2 cbq bandwidth 10Mbit rate 1Mbit \
allot 1514 cell 8 weight 100Kbit prio 3 maxburst 20 avpkt 1000 split 1:0 \
defmap c0
A small note on all these options would have saved me a lot of guess-work.
But anyway, don't take me wrong. I think that iproute2 is one of the coolest networking tools I've ever seen.
Ramin
Quoted 2 lines
-jwb
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Due to the lack of documentation for TC, I have started to write a TC command reference. It's not finished but maybe you will find it usefull.
Regards,
Daniel
-----Original Message-----
From: [email protected] [mailto:[email protected]]On Behalf Of Ramin Alidousti
Sent: Thursday, June 14, 2001 5:18 AM
To: Jeffrey W. Baker
Cc: streeterk; Linux Advanced Routing
Subject: Re: Re: [LARTC] How to use tc to limit bandwidth of a special IP in LAN
On Wed, Jun 13, 2001 at 07:10:00PM -0700, Jeffrey W. Baker wrote:
Yes. I have these .tex files as well. Much beter than scanning through the source code...
"ip" is kind of easy to follow (maybe because I already know what I'm looking
for) but when it comes down to "tc", my head spins. Take the following (easy)
example:
tc class add dev eth1 parent 1:1 classid 1:2 cbq bandwidth 10Mbit rate 1Mbit \
allot 1514 cell 8 weight 100Kbit prio 3 maxburst 20 avpkt 1000 split 1:0 \
defmap c0
A small note on all these options would have saved me a lot of guess-work.
But anyway, don't take me wrong. I think that iproute2 is one of the coolest networking tools I've ever seen.
Ramin
Quoted 2 lines
-jwb
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:
http://ds9a.nl/2.4Routing/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/