Skip to contentSkip to conversation

Limiting upstream trafic with classes that borrow bandwith

LARTC Javier Miguel Rodríguez 2 participants 3 messages Jun 13, 2001 – Jun 15, 2001

lore
Share & tools
lore
#0 lore raw

Hello

I have a DSL connection, 256 kbits downstream, 128 kbits upstream

I am using cbq-init script to shape bandwith
(ftp://ftp.equinox.gu.net/pub/linux/cbq)

I have two upstream connections I want to shape: rsync+ssh with only ONE
remote host, and qmail mail server with all the internet

What I want is this: I have 128 kbits upstream. These are the rules

*Web, ftp, telnet, icq trafic are MORE important for me than rsync or qmail
* If have upstream spare bandwith, I want rsync+ssh (or qmail) to fullfit
it.
* Rsync+ssh trafic is more important than qmail trafic, but I want qmail
should have a guaranted 56 Kbit upstream rate

So, for example, if total upstream bandwith is 128 kbits:

* No web trafic, no qmail trafic -> rsync+ssh should have 128 kbits upstream
* No web trafic, no rsync+ssh trafic ---> qmail should have 128 kbits upstream
* Rsync+ssh AND qmail---> 72 kbits rsync, 56 kb qmail
* Web or ftp trafic and rsync+ssh ---> web: 128 kbits, rsync:0
* Web and qmail ------------------------> 72 kbits web, 56 kbits qmail
* Web, qmail and rsync ---------------> 72 kbits web, 56 kbits qmail, 0 rsync

By now, the only thing I have been able to achieve is limiting ssh and mail
upstream to 56kbits each :-(

These are my /etc/sysconfig/cbq files

* cbq-1000.all_bandwith

DEVICE=eth0,10Mbit,1Mbit
RATE8Kbit
WEIGHTKbit
PRIO=5
LEAF=none

This is my ssh config

* cbq-1001.ssh2_remote_host

DEVICE=eth0,10Mbit,1Mbit
RATEVKbit
WEIGHT=5Kbit
PRIO=5
PARENT00
BOUNDED=no
RULE=MY_IP,REMOTE_HOST_IP:22

And this is my qmail file

* cbq-1002.mail

DEVICE=eth0,10Mbit,1Mbit
RATEVKbit
WEIGHT=5Kbit
PRIO=5
PARENT00
BOUNDED=no
RULE=MY_IP,:25

Can someone help me? Thank you in advance

Greetings from Spain!

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

#1 lore raw
Quoted 29 lines · Javier Miguel Rodr¨ªguez

Hello

I have a DSL connection, 256 kbits downstream, 128 kbits upstream

I am using cbq-init script to shape bandwith
(ftp://ftp.equinox.gu.net/pub/linux/cbq)

I have two upstream connections I want to shape: rsync+ssh with only ONE
remote host, and qmail mail server with all the internet

What I want is this: I have 128 kbits upstream. These are the rules

*Web, ftp, telnet, icq trafic are MORE important for me than rsync or qmail
* If have upstream spare bandwith, I want rsync+ssh (or qmail) to fullfit
it.
* Rsync+ssh trafic is more important than qmail trafic, but I want qmail
should have a guaranted 56 Kbit upstream rate

So, for example, if total upstream bandwith is 128 kbits:

* No web trafic, no qmail trafic -> rsync+ssh should have 128 kbits upstream
* No web trafic, no rsync+ssh trafic ---> qmail should have 128 kbits upstream
* Rsync+ssh AND qmail---> 72 kbits rsync, 56 kb qmail
* Web or ftp trafic and rsync+ssh ---> web: 128 kbits, rsync:0
* Web and qmail ------------------------> 72 kbits web, 56 kbits qmail
* Web, qmail and rsync ---------------> 72 kbits web, 56 kbits qmail, 0 rsync

Quoted 2 lines

By now, the only thing I have been able to achieve is limiting ssh and mail
upstream to 56kbits each :-(

I'm working on an example like this. I still have to test it. Take a
look at my website for details.

I will try to give a CBQ inplementation for you setup :

web qmail ssh
---------------

     56     72

128 0
72 56
72 56 0

possible CBQ implementation :

CBQ root qdisc 10mbit
CBQ Class BandWidtj 10mbit 256kbit BOUNDED
CBQ qdisc BW 256kbit
CBQ class BW 256kbit rate 56 kbit : QMAIL
CBQ class BW 256kbit rate 72 kbit : WEB and SSH and Rsync
Here you can choose : you can take a prio qdisc so WEB will have
allways have 100% OR you can take a CBQ Qdisc and 2 classes so ssh and rsync will have a small bandwidth and will not starve:
CBQ qdisc BW 72kbit
CBQ class BW 72kbit rate 56 kbit : WEB
CBQ class BW 72kbit rate 6 kbit : SSH : This class will allways
have a little bit BW

Now create some filter, attach them to the different qdiscs and put the traffic in the classes where they belong. This should work.

Signature · 7 lines
Stef

More QOS info : http://users.belgacom.net/staf/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
#2 lore raw
In reply to Javier Miguel Rodríguez
Quoted 29 lines · Javier Miguel Rodr¨ªguez

Hello

I have a DSL connection, 256 kbits downstream, 128 kbits upstream

I am using cbq-init script to shape bandwith
(ftp://ftp.equinox.gu.net/pub/linux/cbq)

I have two upstream connections I want to shape: rsync+ssh with only ONE
remote host, and qmail mail server with all the internet

What I want is this: I have 128 kbits upstream. These are the rules

*Web, ftp, telnet, icq trafic are MORE important for me than rsync or qmail
* If have upstream spare bandwith, I want rsync+ssh (or qmail) to fullfit
it.
* Rsync+ssh trafic is more important than qmail trafic, but I want qmail
should have a guaranted 56 Kbit upstream rate

So, for example, if total upstream bandwith is 128 kbits:

* No web trafic, no qmail trafic -> rsync+ssh should have 128 kbits upstream
* No web trafic, no rsync+ssh trafic ---> qmail should have 128 kbits upstream
* Rsync+ssh AND qmail---> 72 kbits rsync, 56 kb qmail
* Web or ftp trafic and rsync+ssh ---> web: 128 kbits, rsync:0
* Web and qmail ------------------------> 72 kbits web, 56 kbits qmail
* Web, qmail and rsync ---------------> 72 kbits web, 56 kbits qmail, 0 rsync

Quoted 2 lines

By now, the only thing I have been able to achieve is limiting ssh and mail
upstream to 56kbits each :-(

I'm working on an example like this. I still have to test it. Take a
look at my website for details.

I will try to give a CBQ inplementation for you setup :

web qmail ssh
---------------

     56     72

128 0
72 56
72 56 0

possible CBQ implementation :

CBQ root qdisc 10mbit
CBQ Class BandWidtj 10mbit 256kbit BOUNDED
CBQ qdisc BW 256kbit
CBQ class BW 256kbit rate 56 kbit : QMAIL
CBQ class BW 256kbit rate 72 kbit : WEB and SSH and Rsync
Here you can choose : you can take a prio qdisc so WEB will have
allways have 100% OR you can take a CBQ Qdisc and 2 classes so ssh and rsync will have a small bandwidth and will not starve:
CBQ qdisc BW 72kbit
CBQ class BW 72kbit rate 56 kbit : WEB
CBQ class BW 72kbit rate 6 kbit : SSH : This class will allways
have a little bit BW

Now create some filter, attach them to the different qdiscs and put the traffic in the classes where they belong. This should work.

Signature · 8 lines
Stef

More QOS info : http://users.belgacom.net/staf/


_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/