Skip to contentSkip to conversation

How many cards....

LARTC [email protected] 1 participant 1 message Jun 19, 2001

lore
Share & tools
lore
#0 lore raw

We/ve done this, as well, with one 4-port card and the 2 native ethernet NICs on the motherboard of a Dell PowerApp 1u device. Or with an ATM interface and the 2 built-ins. The DLink 570TX has just worked for us as a router.

No problems, no hiccups, no surprises.

Gerry
--

Quoted 11 lines · Gilberto Braz - NSIS
Quoted 3 lines

Thank all for fast help in my question. Anybody use DLINK 570 TX with 4 ports ? It was developed to NT, Does it work with Linux?

we've just built a multi-port ethernet router using three of them, and we've had no problems in the first month of operation. By default, they appear as individual eth ports, and so, in my system, exist as eth1-eth12 (eth0 is the onboard NIC).

Quoted 8 lines

You can do more complex stuff, like muxing them together to appear as a single 400Mb/s card, but I'm not qualified to comment on how well that works...

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

Gerry Creager
Computer Science Dept.
Texas A&M University
979.458.4020

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/