Skip to contentSkip to conversation

Re

LARTC Michal Kolesar 2 participants 2 messages Jun 22, 2001

lore
Share & tools
lore
#0 lore raw

I dont use modules... I compiled all directly to the kernel....

but it seems that the u32 is not compiled in kernel...

but I have really care for compiling everithing in kernel..

kolisko

----- Original Message -----
From: "Stef Coene" <[email protected]>
To: "Michal Kolesar" <[email protected]>
Cc: <[email protected]>
Sent: Thursday, June 21, 2001 3:44 PM
Subject: Re: [LARTC] RTNETLINK answers: Invalid argument

Quoted 63 lines
Quoted 37 lines

Michal Kolesar wrote:

Hi all,

I have installed 2.4.5 kernel, Debian Potato.

my tc script:
#!/bin/bash

tc qdisc add dev eth1 root handle 20: cbq bandwidth 10Mbit avpkt 1000 echo root
tc class add dev eth1 parent 20:0 classid 20:1 cbq bandwidth 10Mbit rate \
10Mbit allot 1514 weight 1Mbit prio 8 maxburst 20 avpkt 1000 echo class
tc class add dev eth1 parent 20:1 classid 20:100 cbq bandwidth 10Mbit rate \
5Mbit allot 1514 weight 500Kbit prio 5 maxburst 20 avpkt 1000 \
bounded
echo 100
tc class add dev eth1 parent 20:1 classid 20:200 cbq bandwidth 10Mbit rate \
5Mbit allot 1514 weight 500Kbit prio 5 maxburst 20 avpkt 1000 \
bounded
echo 200
tc qdisc add dev eth1 parent 20:100 sfq quantum 1514b perturb 15 echo sfq100
tc qdisc add dev eth1 parent 20:200 sfq quantum 1514b perturb 15 echo sfq200
tc filter add dev eth1 parent 20:0 prio 25 u32 match ip src 192.168.0.7 flowid 20:100
echo filter100
tc filter add dev eth1 parent 20:0 prio 50 u32 match ip src 192.168.0.0/24 flowid 20:100
echo filter200

Quoted 12 lines

after running my tc script:
0 root@gateway:/root# source /etc/init.d/tc
root
class
100
200
sfq100
sfq200
RTNETLINK answers: Invalid argument
filter100
RTNETLINK answers: Invalid argument
filter200

Do you use modules? No: make sure you enabled everything, Yes: make sure te modules are loaded.

Stef

Signature · 6 lines
[email protected]        [email protected]
More QOS info : http://users.belgacom.net/staf/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
#1 lore raw

I've met similar problem before. It seems sometime the system do not work smoothly.

I solve the problem by execute the script as normal , then execute the failed command by hand , then it works.

Quoted 69 lines

I dont use modules... I compiled all directly to the kernel....

but it seems that the u32 is not compiled in kernel...

but I have really care for compiling everithing in kernel..

kolisko----- Original Message -----From: "Stef Coene" <[email protected]>To: "Michal Kolesar" <[email protected]>Cc:
<[email protected]>Sent: Thursday, June 21, 2001 3:44 PMSubject:
Re: [LARTC] RTNETLINK answers: Invalid argument > > Michal Kolesar

Quoted 9 lines · wrote:
Quoted 9 lines

Hi all,

I have installed 2.4.5 kernel, Debian Potato.

my tc script:
#!/bin/bash

tc qdisc add dev eth1 root handle 20: cbq bandwidth 10Mbit avpkt

1000

Quoted 2 lines
Quoted 2 lines

echo root
tc class add dev eth1 parent 20:0 classid 20:1 cbq bandwidth

10Mbit

Quoted 4 lines
Quoted 4 lines

rate \
10Mbit allot 1514 weight 1Mbit prio 8 maxburst 20 avpkt 1000 echo class
tc class add dev eth1 parent 20:1 classid 20:100 cbq bandwidth

10Mbit

Quoted 5 lines
Quoted 5 lines

rate \
5Mbit allot 1514 weight 500Kbit prio 5 maxburst 20 avpkt 1000 \
bounded
echo 100
tc class add dev eth1 parent 20:1 classid 20:200 cbq bandwidth

10Mbit

Quoted 34 lines
Quoted 16 lines

rate \
5Mbit allot 1514 weight 500Kbit prio 5 maxburst 20 avpkt 1000 \
bounded
echo 200
tc qdisc add dev eth1 parent 20:100 sfq quantum 1514b perturb 15 echo sfq100
tc qdisc add dev eth1 parent 20:200 sfq quantum 1514b perturb 15 echo sfq200
tc filter add dev eth1 parent 20:0 prio 25 u32 match ip src 192.168.0.7 flowid 20:100
echo filter100
tc filter add dev eth1 parent 20:0 prio 50 u32 match ip src 192.168.0.0/24 flowid 20:100
echo filter200

Quoted 12 lines

after running my tc script:
0 root@gateway:/root# source /etc/init.d/tc
root
class
100
200
sfq100
sfq200
RTNETLINK answers: Invalid argument
filter100
RTNETLINK answers: Invalid argument
filter200

Do you use modules? No: make sure you enabled everything, Yes: make

sure te modules are loaded.

Stef