Skip to contentSkip to conversation

prio fighting

LARTC Nikolai Vladychevski 2 participants 2 messages Jun 26, 2001 – Jun 27, 2001

lore
Share & tools
lore
#0 lore raw

Hi,

I have done this setup to give the machine 192.168.1.4 (masqueraded over dialup) the highest priority:

#! /bin/bash
WHAT="add"
iptables -A PREROUTING -i eth0 -s 192.168.1.1 -t mangle -j MARK --set-mark 1
iptables -A PREROUTING -i eth0 -s 192.168.1.4 -t mangle -j MARK --set-mark 4
tc qdisc $WHAT dev ppp0 root handle 1: prio bands 3 priomap 0 1 2 tc qdisc $WHAT dev ppp0 parent 1:1 handle 2: pfifo limit 1024 tc qdisc $WHAT dev ppp0 parent 1:2 handle 3: pfifo limit 1024 tc qdisc $WHAT dev ppp0 parent 1:3 handle 4: pfifo limit 1024 tc filter add dev ppp0 protocol ip parent 1:0 prio 0 handle 4 fw classid 1:2
tc filter add dev ppp0 protocol ip parent 1:0 prio 2 handle 1 fw classid 1:3

and it is working because form the stats I can see the packets are flowing:

[root@qis /root]# tc -s -r qdisc show dev ppp0 qdisc pfifo 4: limit 1024p
Sent 42374 bytes 804 pkts (dropped 0, overlimits 0)

qdisc pfifo 3: limit 1024p
Sent 16535 bytes 381 pkts (dropped 0, overlimits 0)

qdisc pfifo 2: limit 1024p
Sent 589 bytes 10 pkts (dropped 0, overlimits 0)

qdisc prio 1: bands 3 priomap 0 1 2 2 1 2 0 0 1 1 1 1 1 1 1 1 Sent 59498 bytes 1195 pkts (dropped 0, overlimits 0)

There is just 1 problem, the prioritization is not working. When I start downloading FTP on on the machine 192.168.1.1 , wait 20-30 secs and start another FTP session on 192.168.1.4 it does not gets the full bandwidth as it should get. What could be wrong? One workstation is linux (.1) , other is Win98 (.4), I don't know if this could be the issue.

Thanks in advance

Nikolai

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

#1 lore raw
Quoted 5 lines · Nikolai Vladychevski

Hi,

I have done this setup to give the machine 192.168.1.4 (masqueraded over dialup) the highest priority:

Quoted 14 lines

#! /bin/bash
WHAT="add"
iptables -A PREROUTING -i eth0 -s 192.168.1.1 -t mangle -j MARK --set-mark 1
iptables -A PREROUTING -i eth0 -s 192.168.1.4 -t mangle -j MARK --set-mark 4
tc qdisc $WHAT dev ppp0 root handle 1: prio bands 3 priomap 0 1 2 tc qdisc $WHAT dev ppp0 parent 1:1 handle 2: pfifo limit 1024 tc qdisc $WHAT dev ppp0 parent 1:2 handle 3: pfifo limit 1024 tc qdisc $WHAT dev ppp0 parent 1:3 handle 4: pfifo limit 1024 tc filter add dev ppp0 protocol ip parent 1:0 prio 0 handle 4 fw classid 1:2
tc filter add dev ppp0 protocol ip parent 1:0 prio 2 handle 1 fw classid 1:3

Have you tried "classid 2:" and "classid 3:" instead of "classid 1:2" and "classid 1:3"? It would seem to me to work better that way.

Quoted 17 lines

and it is working because form the stats I can see the packets are flowing:

[root@qis /root]# tc -s -r qdisc show dev ppp0 qdisc pfifo 4: limit 1024p
Sent 42374 bytes 804 pkts (dropped 0, overlimits 0)

qdisc pfifo 3: limit 1024p
Sent 16535 bytes 381 pkts (dropped 0, overlimits 0)

qdisc pfifo 2: limit 1024p
Sent 589 bytes 10 pkts (dropped 0, overlimits 0)

qdisc prio 1: bands 3 priomap 0 1 2 2 1 2 0 0 1 1 1 1 1 1 1 1 Sent 59498 bytes 1195 pkts (dropped 0, overlimits 0)

Quoted 6 lines

There is just 1 problem, the prioritization is not working. When I start downloading FTP on on the machine 192.168.1.1 , wait 20-30 secs and start another FTP session on 192.168.1.4 it does not gets the full bandwidth as it should get. What could be wrong? One workstation is linux (.1) , other is Win98 (.4), I don't know if this could be the issue.

I could be the subqueue discipline that you're using. I would think that the tbf queue discipline would be more fair in this situation.

Signature · 7 lines
-----------------------------------------------------------------------
Phil Brutsche                                      [email protected]


_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/