Skip to contentSkip to conversation

RTNETLINK Problems <ip route> don't work as expected. (I think)

LARTC Theo Cabrerizo Diem 3 participants 3 messages Jun 28, 2001 – Jun 29, 2001

lore
Share & tools
lore
#0 lore raw

Hi,

I have one firewall with 3 ethernet cards, 2 internet links, one cisco 2920 and one problem in RTNETLINK ;o)

Let me explain my network :

| *** Internet Link 1 *** *** Internet Link
2 ***

                10.1.0.1|        Serial              Serial      | 10.2.0.1

|||| +--------------+ +------------+

                                       |            |
||                                       +------------+
                               10.1.0.2|    CISCO   | 10.2.0.2
                                       +------+-----+
                                  192.168.1.1 / 192.168.2.1
                                              |
                                eth2 192.168.1.2/ 192.168.2.1
                                       +------------+
                                          FIREWALL
                                       +-+--------+-+
                          10.20.0.0  eth0|        |eth1 10.30.0.0
                                         |        |
                                 MY DMZ NET      MY CORPORATE NET

I used reserved IPs for security reasons .. <sorry :o( > What I'm trying to do:
I don't want to use my cisco default route, because I will do some filtering, based on source address, at my firewall to choose wich link to use, so I must add (at my firewall) a default route using my ISP 1 end <10.1.0.1> at one routing table, and other default route using my ISP 2 end <10.2.0.1> at another routing table, and do trafic control using iptables/iproute <as described in Advanced Routing how-to>.

the problem is ... RTNETLINK says Unreachable Network when I try to add a route, using a gateway wich isn't directly connected to my firewall :o( this is the line I'm trying to use :
<I know I'm not writing on a specific routing table to do traffic control>

ip route add default via 10.1.0.1|
RTNETLINK answers: Network is unreachable

So .. I've tried
ip route add default via 10.1.0.1 nexthop via 192.168.1.1 RTNETLINK answers: Invalid argument

Can anyone help me ? If someone need more info, ask me ... <please reply me at [email protected] but I will check this list every day ;o) >

[]'s

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

#1 lore raw

Do you have a route (no default) to that destination? It should work if you do.

Ramin

Quoted 43 lines · Theo Cabrerizo Diem

Hi,

I have one firewall with 3 ethernet cards, 2 internet links, one cisco 2920 and one problem in RTNETLINK ;o)

Let me explain my network :

| *** Internet Link 1 *** *** Internet Link
2 ***

                10.1.0.1|        Serial              Serial      | 10.2.0.1

|||| +--------------+ +------------+

                                       |            |
||                                       +------------+
                               10.1.0.2|    CISCO   | 10.2.0.2
                                       +------+-----+
                                  192.168.1.1 / 192.168.2.1
                                              |
                                eth2 192.168.1.2/ 192.168.2.1
                                       +------------+
                                          FIREWALL
                                       +-+--------+-+
                          10.20.0.0  eth0|        |eth1 10.30.0.0
                                         |        |
                                 MY DMZ NET      MY CORPORATE NET

I used reserved IPs for security reasons .. <sorry :o( > What I'm trying to do:
I don't want to use my cisco default route, because I will do some filtering, based on source address, at my firewall to choose wich link to use, so I must add (at my firewall) a default route using my ISP 1 end <10.1.0.1> at one routing table, and other default route using my ISP 2 end <10.2.0.1> at another routing table, and do trafic control using iptables/iproute <as described in Advanced Routing how-to>.

the problem is ... RTNETLINK says Unreachable Network when I try to add a route, using a gateway wich isn't directly connected to my firewall :o( this is the line I'm trying to use :
<I know I'm not writing on a specific routing table to do traffic control>

ip route add default via 10.1.0.1|
RTNETLINK answers: Network is unreachable

Quoted 8 lines

So .. I've tried
ip route add default via 10.1.0.1 nexthop via 192.168.1.1 RTNETLINK answers: Invalid argument

Can anyone help me ? If someone need more info, ask me ... <please reply me at [email protected] but I will check this list every day ;o) >

[]'s

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

#2 lore raw
In reply to Theo Cabrerizo Diem

Yes, I can ping 10.1.0.1.

I tried from another box, <one connected to my corporate net> and without using any default route, I can add a route to 10.1.0.1 using my firewall as gateway (and my firewall with a route configured too), but I can't use it as gateway to my default route ... :o/

<reply me at [email protected]>

Theo.

Quoted 59 lines · Ramin Alidousti

Do you have a route (no default) to that destination? It should work if you do.

Ramin

Quoted 52 lines · Theo Cabrerizo Diem

Hi,

I have one firewall with 3 ethernet cards, 2 internet links, one cisco 2920 and one problem in RTNETLINK ;o)

Let me explain my network :

| *** Internet Link 1 *** *** Internet Link
2 ***

               10.1.0.1|        Serial              Serial      | 10.2.0.1

|||| +--------------+ +------------+

                                      |            |
||                                       +------------+
                              10.1.0.2|    CISCO   | 10.2.0.2
                                      +------+-----+
                                 192.168.1.1 / 192.168.2.1
                                             |
                               eth2 192.168.1.2/ 192.168.2.1
                                      +------------+
                                         FIREWALL
                                      +-+--------+-+
                         10.20.0.0  eth0|        |eth1 10.30.0.0
                                        |        |
                                MY DMZ NET      MY CORPORATE NET

I used reserved IPs for security reasons .. <sorry :o( > What I'm trying to do:
I don't want to use my cisco default route, because I will do some filtering, based on source address, at my firewall to choose wich link to use, so I must add (at my firewall) a default route using my ISP 1 end <10.1.0.1> at one routing table, and other default route using my ISP 2 end <10.2.0.1> at another routing table, and do trafic control using iptables/iproute <as described in Advanced Routing how-to>.

the problem is ... RTNETLINK says Unreachable Network when I try to add a route, using a gateway wich isn't directly connected to my firewall :o( this is the line I'm trying to use :
<I know I'm not writing on a specific routing table to do traffic control>

ip route add default via 10.1.0.1|
RTNETLINK answers: Network is unreachable

So .. I've tried
ip route add default via 10.1.0.1 nexthop via 192.168.1.1 RTNETLINK answers: Invalid argument

Can anyone help me ? If someone need more info, ask me ... <please reply me at [email protected] but I will check this list every day ;o) >

[]'s

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/