What type of machine to do routing ?
Hi all,
I need to do traffic control on a 2 Mbit/s link with 100 users on the LAN.
What machine do I need (CPU, RAM, HDD) ?
thanks
------------------------------------------------
Franck BALAZOT ([email protected])
AETA.COM
361, Avenue du Général De Gaulle
92140 CLAMART
FRANCE
Tél:01.41.36.12.93
------------------------------------------------
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 7 lines · Franck BALAZOT
Hi all,
I need to do traffic control on a 2 Mbit/s link with 100 users on the LAN.
What machine do I need (CPU, RAM, HDD) ?
If you only want to do (static) routing without firewalling/NAT then an old Pentium 100MHz with 64MB should do it. Concerning the HDD: get the smallest you can buy nowadays.
Juri
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
In fact I want to manage the bandwitdth with Class Based Queueing with iproute2. Perharps a 100Mhz CPU isn't powerfull enough ?
Quoted 13 lines · Juri Haberland
Quoted 7 lines · Franck BALAZOT
Hi all,
I need to do traffic control on a 2 Mbit/s link with 100 users on the LAN.
What machine do I need (CPU, RAM, HDD) ?
If you only want to do (static) routing without firewalling/NAT then an old Pentium 100MHz with 64MB should do it. Concerning the HDD: get the smallest you can buy nowadays.
Quoted 5 lines
Juri
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
--
------------------------------------------------
Franck BALAZOT ([email protected])
AETA.COM
361, Avenue du Général De Gaulle
92140 CLAMART
FRANCE
Tél:01.41.36.12.93
------------------------------------------------
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 4 lines · Franck BALAZOT
In fact I want to manage the bandwitdth with Class Based Queueing with iproute2.
Perharps a 100Mhz CPU isn't powerfull enough ?
Quoted 10 lines
Quoted 8 lines · Juri Haberland
If you only want to do (static) routing without firewalling/NAT then an old Pentium 100MHz with 64MB should do it. Concerning the HDD: get the smallest you can buy nowadays.
Juri
_______________________________________________
I haven't had any difficulties running NAT/Firewalling with a Pentium 90 MHz with 48 Megs of RAM. Currently, I am not running iproute2 or doing any shaping (just lurking to pick up information until I have a chance to recompile my kernel and give it a go)
I'm using ipchains and ipmasqadm
The machine is also running bind (to provide a local caching name server for my DNS requests) and xntp (to provide time synchronization). Approximately 10 computers/workstations are connected on my local network and I have no services open to external connection other than incoming mail (port 25 which is forwarded to an internal mail server).
Steve
------------------------------------------------------------------
Steve Bush ([email protected]), Charybdis Technologies, Inc. "There was a point to this narrative, but it has presently escaped
the chronicler's mind." --Douglas Adams (1952-2001)
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 3 lines · Franck BALAZOT
In fact I want to manage the bandwitdth with Class Based Queueing with iproute2. Perharps a 100Mhz CPU isn't powerfull enough ?
I'm not quite sure but it could work. If you intend to by a new computer than any will do (assuming that you cannot by anything less than a PI-233)...
Quoted 6 lines
Quoted 4 lines · Juri Haberland
Quoted 3 lines · Franck BALAZOT
Hi all,
Quoted 8 lines
Quoted 8 lines
Quoted 4 lines
I need to do traffic control on a 2 Mbit/s link with 100 users on the LAN.
What machine do I need (CPU, RAM, HDD) ?
If you only want to do (static) routing without firewalling/NAT then an old Pentium 100MHz with 64MB should do it. Concerning the HDD: get the smallest you can buy nowadays.
Cheers,
Juri
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 2 lines · Franck BALAZOT
In fact I want to manage the bandwitdth with Class Based Queueing with iproute2. Perharps a 100Mhz CPU isn't powerfull enough ?
(Please answer below the quote and cut the irrelevant parts.)
We had set up a bandwidth managing router with a 3-level class tree, and as far as we've seen, it works fine with a Pentium-90.
I recommend you should try it first.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/