Skip to contentSkip to conversation

Traffic Control on bridge

LARTC Shao Ming 1 participant 1 message Jul 12, 2001

lore
Share & tools
lore

Shao Ming

author
#0 lore raw

Hi!

I was trying to implement traffic control on a linux bridge (2.4.5).

Basically, I'll need to allocate designated bandwidth to various services while the rest get throttled.

Eg. on a 10MBit bandwidth.
http/ftp will get 128K
while the rest (smtp/POP3) will get 64K.
Whatever traffic passing through the bridge
in one direction must not exceed 192K.

To my dismay, I realised that firewall marking classifier will not work under bridging mode.

So right now I'm kind of stuck because of that.

Can someone tell me whether if I can implement something like the above with the u32 classifier?
I was trying the u32 classifier but the bandwith does not seem to behave correctly.

cheers!
/shaoming

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/