Skip to contentSkip to conversation

routing help

LARTC admin 3 participants 4 messages Jul 13, 2001 – Jul 1, 2007

lore
Share & tools
lore

admin

author
#0 lore raw

Hi

I have 2 1/4 c class here and i need to connect it together like
net <->(cisco)<->192.168.1.0<-linux router ip2->192.168.2.0 any idea on the command line ???
I look at the how-to and din d find anyting !

#1 lore raw
Quoted 8 lines · admin

Hi

I have 2 1/4 c class here and i need to connect it together like
net <->(cisco)<->192.168.1.0<-linux router ip2->192.168.2.0 any idea on the command line ???
I look at the how-to and din d find anyting !

I'm guessing that you have a cisco router as your default route to the internet. Is that right?

Reply with details, and we'll be able to help more. You should look into learning more about networking concepts too.

You can make the linux the main central router, with a connection directly from linux to the cisco router. Then you set the default route to the linux box, and linux handles the rest once configured.

How many comps are on each network? Do you use dhcp?

Mike

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

#2 lore raw

[LARTC] Routing help

In reply to admin

Hi,

I need a help on Linux routing, if you have some sparse time. I'm based in Madagascar and my English is not good; so please forgive me.

*What I want to come-up with:

*My main goal is to download using two modems at the same time, and combining their bandwidth, but I have failed miserably. The reason is
this: our country is still using poor slow internets, and I have seen on the Internet the various ways of combining several Internet connections into one single connection, to get a higher bandwidth.

*What I have:*

I have 2 modem, 2 accounts on the 1 same ISP.
I have tried using openSUSE 10.2 and Gentoo 2007.0, but none of them satisfied my deep need.

*What I have tried already:*

I have been spending days on the Routing guide that you provided on
http://lartc.org/howto/, but I have failed miserably to make it work, and my Internet connection is all broken when I try it.
I'm not a Network expert, and I'm so confused by what all the addresses, interfaces, ... that need to be configured.

Multilinking doesn't work either, and so, routing is the last resort.

*The problems that I'm facing:*

My connection is broken whenever I tried using the multilinking routing techniques that you showed on the site. And I thus have to reboot everytime it gets broken.

Here is what my ip shows me, as you instructed in the guide:

_Using 1 modem only:
_

# ip route show
2.2.2.2 dev ppp0  proto kernel  scope link  src 62.56.163.150
127.0.0.0/8 dev lo  scope link
default via 2.2.2.2 dev ppp0
# ip link show
1: lo: <LOOPBACK,UP,10000> mtu 16436 qdisc noqueue
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
18: ppp0: <POINTOPOINT,MULTICAST,NOARP,UP,10000> mtu 1500 qdisc
pfifo_fast qlen 3
    link/ppp

_Using both modem:_

# ip route show
2.2.2.2 dev ppp0  proto kernel  scope link  src 62.56.163.150
2.2.2.2 dev ppp1  proto kernel  scope link  src 62.56.163.135
127.0.0.0/8 dev lo  scope link
default via 2.2.2.2 dev ppp0
# ip link show
1: lo: <LOOPBACK,UP,10000> mtu 16436 qdisc noqueue
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
18: ppp0: <POINTOPOINT,MULTICAST,NOARP,UP,10000> mtu 1500 qdisc
pfifo_fast qlen 3
    link/ppp
19: ppp1: <POINTOPOINT,MULTICAST,NOARP,UP,10000> mtu 1500 qdisc
pfifo_fast qlen 3
    link/ppp

I'm just asking you to help me, of course, if you have time. I'm desperate to have this thing working, and I can issue any commands that you ask into my system, if you need to.

Thanks a lot.

Zedeck.

PS: Current system is Gentoo 2007.0.

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

#3 lore raw

[LARTC] Routing help

In reply to admin

Hi,

I need a help on Linux routing, if you have some sparse time. I'm based in Madagascar and my English is not good; so please forgive me.

*What I want to come-up with:

*My main goal is to download using two modems at the same time, and combining their bandwidth, but I have failed miserably. The reason is
this: our country is still using poor slow internets, and I have seen on the Internet the various ways of combining several Internet connections into one single connection, to get a higher bandwidth.

*What I have:*

I have 2 modem, 2 accounts on the 1 same ISP.
I have tried using openSUSE 10.2 and Gentoo 2007.0, but none of them satisfied my deep need.

*What I have tried already:*

I have been spending days on the Routing guide that you provided on
http://lartc.org/howto/, but I have failed miserably to make it work, and my Internet connection is all broken when I try it.
I'm not a Network expert, and I'm so confused by what all the addresses, interfaces, ... that need to be configured.

Multilinking doesn't work either, and so, routing is the last resort.

*The problems that I'm facing:*

My connection is broken whenever I tried using the multilinking routing techniques that you showed on the site. And I thus have to reboot everytime it gets broken.

Here is what my ip shows me, as you instructed in the guide:

_Using 1 modem only:
_

# ip route show
2.2.2.2 dev ppp0  proto kernel  scope link  src 62.56.163.150
127.0.0.0/8 dev lo  scope link
default via 2.2.2.2 dev ppp0
# ip link show
1: lo: <LOOPBACK,UP,10000> mtu 16436 qdisc noqueue
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
18: ppp0: <POINTOPOINT,MULTICAST,NOARP,UP,10000> mtu 1500 qdisc
pfifo_fast qlen 3
    link/ppp

_Using both modem:_

# ip route show
2.2.2.2 dev ppp0  proto kernel  scope link  src 62.56.163.150
2.2.2.2 dev ppp1  proto kernel  scope link  src 62.56.163.135
127.0.0.0/8 dev lo  scope link
default via 2.2.2.2 dev ppp0
# ip link show
1: lo: <LOOPBACK,UP,10000> mtu 16436 qdisc noqueue
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
18: ppp0: <POINTOPOINT,MULTICAST,NOARP,UP,10000> mtu 1500 qdisc
pfifo_fast qlen 3
    link/ppp
19: ppp1: <POINTOPOINT,MULTICAST,NOARP,UP,10000> mtu 1500 qdisc
pfifo_fast qlen 3
    link/ppp

I'm just asking you to help me, of course, if you have time. I'm desperate to have this thing working, and I can issue any commands that you ask into my system, if you need to.

Thanks a lot.

Zedeck.

PS: Current system is Gentoo 2007.0.

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc