Skip to contentSkip to conversation

problems w/hotplug, Debian Woody, and Handspring Visor

DISCUSSION Bret Comstock Waldow 1 participant 1 message Dec 25, 2002

lore
Share & tools
lore
#0 lore raw

Hi,

I've been using Redhat 7.3 for months, with hotplug, gpilod, and Evolution. Hotsyncing has been quite reliable - put the PDA in the cradle, press the button, it works.

I've been trying to switch to Debian Woody (current stable), and haven't been able to get this to work.

I've appended from /var/log/messages below, but the line that stands out is:

Dec 20 10:50:37 ganesha /etc/hotplug/usb.agent: missing kernel or user

mode driver visor

lsmod reports the module is indeed loaded at the time.

I recompiled the kernel (2.4.18) and the module and receive the same message and result. I press the hotsync button, the sequence shown below occurs in /var/log/messages, and no hotsync occurs. It times out and the Visor errors.

Any ideas?

Thanks in advance,
Bret

Here is a section of my /var/log/messages:
====================================
Two attempts to hotsync - and the results from /var/log/messages:

Dec 20 10:49:50 ganesha kernel: hub.c: USB new device connect on bus1/1,
assigned device number 3
Dec 20 10:49:50 ganesha kernel: usb.c: USB new device connect, assigned
device number 3
Dec 20 10:49:50 ganesha kernel: usb.c: USB device 3 (vend/prod
0x82d/0x100) is not claimed by any active driver.
Dec 20 10:49:50 ganesha /etc/hotplug/usb.agent: Setup visor for USB
product 82d/100/0100
Dec 20 10:49:50 ganesha kernel: usbserial.c: USB Serial support
registered for Generic
Dec 20 10:49:50 ganesha kernel: usb.c: registered new driver serial
Dec 20 10:49:50 ganesha kernel: usbserial.c: v1.0.0:USB Serial Driver
core
Dec 20 10:49:50 ganesha kernel: usbserial.c: USB Serial support
registered for Handspring Visor
Dec 20 10:49:50 ganesha kernel: usbserial.c: Handspring Visor converter
detected
Dec 20 10:49:50 ganesha kernel: visor.c: Handspring Visor: Number of
ports: 2
Dec 20 10:49:50 ganesha kernel: visor.c: Handspring Visor: port 1, is
for Generic use and is bound to ttyUSB0
Dec 20 10:49:50 ganesha kernel: visor.c: Handspring Visor: port 2, is
for HotSync use and is bound to ttyUSB1
Dec 20 10:49:50 ganesha kernel: usbserial.c: Handspring Visor converter
now attached to ttyUSB0 (or usb/tts/0 for devfs)
Dec 20 10:49:50 ganesha kernel: usbserial.c: Handspring Visor converter
now attached to ttyUSB1 (or usb/tts/1 for devfs)
Dec 20 10:49:50 ganesha kernel: visor.c: v1.0.0:USB HandSpring Visor
driver
Dec 20 10:49:50 ganesha /etc/hotplug/usb.agent: missing kernel or user
mode driver visor 
Dec 20 10:49:57 ganesha kernel: usb.c: USB disconnect on device 3
Dec 20 10:49:57 ganesha kernel: usbserial.c: Handspring Visor converter
now disconnected from ttyUSB0
Dec 20 10:49:57 ganesha kernel: usbserial.c: Handspring Visor converter
now disconnected from ttyUSB1
Dec 20 10:50:37 ganesha kernel: hub.c: USB new device connect on bus1/1,
assigned device number 4
Dec 20 10:50:37 ganesha kernel: usb.c: USB new device connect, assigned
device number 4
Dec 20 10:50:37 ganesha kernel: usbserial.c: Handspring Visor converter
detected
Dec 20 10:50:37 ganesha kernel: visor.c: Handspring Visor: Number of
ports: 2
Dec 20 10:50:37 ganesha kernel: visor.c: Handspring Visor: port 1, is
for Generic use and is bound to ttyUSB0
Dec 20 10:50:37 ganesha kernel: visor.c: Handspring Visor: port 2, is
for HotSync use and is bound to ttyUSB1
Dec 20 10:50:37 ganesha kernel: usbserial.c: Handspring Visor converter
now attached to ttyUSB0 (or usb/tts/0 for devfs)
Dec 20 10:50:37 ganesha kernel: usbserial.c: Handspring Visor converter
now attached to ttyUSB1 (or usb/tts/1 for devfs)
Dec 20 10:50:37 ganesha /etc/hotplug/usb.agent: Setup visor for USB
product 82d/100/0100
Dec 20 10:50:37 ganesha /etc/hotplug/usb.agent: missing kernel or user
mode driver visor 
Dec 20 10:50:42 ganesha kernel: usb.c: USB disconnect on device 4
Dec 20 10:50:42 ganesha kernel: usbserial.c: Handspring Visor converter
now disconnected from ttyUSB0
Dec 20 10:50:42 ganesha kernel: usbserial.c: Handspring Visor converter

now disconnected from ttyUSB1

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel