LINUX IA64 Memory Support
Hi,
Is there any way in which one can allocate memory say below 4 GB ( physical address )in drivers.
TIA
Venkatesh
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Venkatesh" = Venkatesh Ramamurthy <[email protected]> writes:
Venkatesh> Hi, Is there any way in which one can allocate memory say Venkatesh> below 4 GB ( physical address )in drivers. TIA Venkatesh
This is not IA64 specific actually, so consider it a general answer rather than an IA64 one.
A regular GFP_KERNEL should give you memory within the PCI DMA'able area, which with the old PCI system meant within the 4GB range. GFP_DMA will give you something within the ISA DMA space. However, in principle none of the above means that the memory is within the lower 4GB memory range, if the machine in question has an IOMMU type device, you may be handed memory which is in the middle of the memory space, but which is mapped to the 4GB the PCI bus in the machine can see.
With the new PCI allocation system it is even more flexible, here you may get addresess anywhere and you then tell the PCI subsystem at run time to map the memory to the space the PCI bus can address. This means it will be possible to support systems with for instance 200 PCI busses (if someone feels like building such) etc.
Jes
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines · Jes Sorensen
"Venkatesh" = Venkatesh Ramamurthy <[email protected]> writes:
Venkatesh> Hi, Is there any way in which one can allocate memory say Venkatesh> below 4 GB ( physical address )in drivers. TIA Venkatesh
Jes> This is not IA64 specific actually, so consider it a general Jes> answer rather than an IA64 one.
Jes> A regular GFP_KERNEL should give you memory within the PCI Jes> DMA'able area, which with the old PCI system meant within the Jes> 4GB range. GFP_DMA will give you something within the ISA DMA Jes> space. However, in principle none of the above means that the Jes> memory is within the lower 4GB memory range, if the machine in Jes> question has an IOMMU type device, you may be handed memory Jes> which is in the middle of the memory space, but which is mapped Jes> to the 4GB the PCI bus in the machine can see.
Jes> With the new PCI allocation system it is even more flexible, Jes> here you may get addresess anywhere and you then tell the PCI Jes> subsystem at run time to map the memory to the space the PCI Jes> bus can address. This means it will be possible to support Jes> systems with for instance 200 PCI busses (if someone feels like Jes> building such) etc.
Jes's answer is basically correct:
- If you're writing a driver, use the new PCI DMA API (see pci.h in kernel 2.3.44 or later) and you'll be fine.
- If you need memory below 4GB for some other reason, you're presently out of luck. However, the already agreed upon solution is to add a new "zone" which will represent memory below 4GB (ZONE_32BIT or some such). I plan to do this asap as we need this zone to properly implement the PCI DMA API (it currently works only because no Itanium system we know of/have access to has more than 1GB of RAM ;-).
--david