Skip to contentSkip to conversation

IA64 Boot/Installer CD

Linux-ia64 Nick Pollitt 2 participants 2 messages Feb 26, 2001 – Feb 27, 2001

lore
Share & tools
lore
#0 lore raw

Could someone explain what the bare minimum requirements are for a bootable CD on IA64. I have a kernel and an initrd ready, but I'm not sure how to package them up.

Thanks,
Nick

Signature · 3 lines
Nick Pollitt                                   phone: 650.933.7406
Scalable Linux Project                           fax: 650.933.3542
SGI                                               [email protected]
#1 lore raw

Hi,

Here is how we do it.

1) Create a directory called cdroot. Create a subdirectory called boot.

2) Inside the boot directory, place your kernel and your initial ramdisk. You will also want to put any efi apps or shell scripts that you might need.

3) From inside the cdroot directory, run the attached "mkboot" script. This will create a boot image for your cd.

4) Run the attached "mkiso" script to build the cd image.

5) Run the attached "mkcd" script to burn the image onto the CD. The "mkcd" script is used with an IDE CD-ROM burner, so you may need to adjust cdrecord command for your hardware.

Quoted 16 lines · Nick Pollitt

Could someone explain what the bare minimum requirements are for a bootable CD on IA64. I have a kernel and an initrd ready, but I'm not sure how to package them up.

Thanks,
Nick

Signature · 8 lines
Nick Pollitt                                   phone: 650.933.7406
Scalable Linux Project                           fax: 650.933.3542
SGI                                               [email protected]

_______________________________________________
Linux-IA64 mailing list
[email protected]
http://lists.linuxia64.org/lists/listinfo/linux-ia64
Signature · 3 lines
Mike Madore
Software Engineer
TurboLinux, Inc.

dd if=/dev/zero of=boot.img bs=1024k count=18
/sbin/mkdosfs boot.img
mkdir dos
mount -t msdos -o loop boot.img dos
cp -av boot/* dos/
df dos
umount dos
rmdir dos

mkisofs -no-emul-boot -b boot.img -c boot.catalog -R -T -J -o ../cdrom.img .

#!/bin/bash
if [ $# -lt 1 ]
then
echo "usage: mkcd [-speed #] <image file>"
exit 1
fi
#default speed
speed=8
case $1 in

-speed)  shift;
         speed=$1
         shift;;

esac
image=$1
cdrecord fs=8196k speed=$speed dev=2,0,0 -v -eject $image